Download Black Box MultiPower Miniature

Features
» Bring fiber to the desktop more economically
than fiber NICs.
» Four power options.
» Convert 10-/100-Mbps copper to duplex
or single-strand 100-Mbps fiber,
autonegotiating for speed
on the copper side.
» Single-Mode Long versions support distances
up to 49.7 miles (80 km).
» Operational from -13 to +158° F.
» Include clips for mounting on DIN rails.
Industrial Multi-Power Media Converters extend your 10/100BASE-T network
beyond the 328-foot (100-m) limit—perfect for connecting remote workstations.
Duplex Single-Mode Fiber Optic Cable
up to 43.5 miles (70 km)
Industrial
Multi-Power
Media Converter
(LGC320A-R2)
Industrial
Multi-Power
Media Converter
(LGC320A-R2)
CATx Cable
Industrial Device
CATx Cable
8-Port Hardened Gigabit Switch
(LGH008A)
Industrial Device
CATx Cable
CATx Cable
Industrial
Multi-Power
Media Converter
(LGC320A-R2)
Industrial
Multi-Power
Media Converter
(LGC320A-R2)
Duplex Single-Mode Fiber Optic Cable
up to 43.5 miles (70 km)
OVERVIEW
Now it’s easier than ever to bring fiber to your network, no matter
if your network is spread across a business campus, a large industrial
site, or over great distances and/or subjected to temperature
extremes.
Industrial MultiPower Media Converters bring fiber to the desktop.
These hardened media converters can be powered up one of four
ways and operate in temperature extremes from -13 to +158° F (-25 to
+70° C).
Good things, small packages.
The media converters are easy to install (literally plug-and-play),
tiny enough to fit in anywhere, and very economical.
Use them to bring fiber to the desktop or add fiber segments to
your network to gain extra distance—up to 43.5 miles (70 km) with
single-mode fiber.
10/2/2012
#27201
724-746-5500
Twice the conversion power!
An Industrial MultiPower Media Converter enables you to connect
10-Mbps and 100-Mbps twisted-pair network segments to fiber optic
cabling. It’s both a media and data rate converter with 10/100
auto-negotiation on the twisted-pair port. The fiber port operates at
100 Mbps.
You can also choose Gigabit models to link 1000BASE-TX
twisted-pair network segments to 1000BASE-LX fiber optic cabling.
All Industrial MultiPower Media Converters have an HDX/FDX
function for half- and full-duplex autosensing.
Installation is easy.
Just connect an Industrial MultiPower Media Converter to the
RJ-45 connector on your PC’s 10- or 100-Mbps Ethernet port using
CAT5e cable, then connect fiber optic cable to the other side of the
media converter.
What’s more, these tiny converters tuck unobtrusively behind your
PC.
blackbox.com
­­2 of 7
BLACK BOX
®