Transcript
S P E F C I L E ET-PKF110S Ceiling mount bracket for low ceilings D escription This ceiling mount bracket is used when mounting a PT-FW430 series or other Panasonic projector to low ceilings. Specifications Vertical correction angle: Horizontal slant correction angle: Horizontal turn correction angle: Dimensions (W × H × D): Weight: +5°, -15° ±10° ±5° 313 × 93 × 222 mm (12-5/16˝ × 3-21/32˝ × 8-3/4˝) Approx. 1.5 kg* (3.3 lbs*) * Average value. May differ depending on models. Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . 1 Projector mount bracket . . . . . . . . . . . . . . . . . . . 1 Washer-fitted bolts (M4 × 10) . . . . . . . . . . . . . . . 4 Wire rope for projector mount bracket . . . . . . . . 1 Wire rope for projector unit . . . . . . . . . . . . . . . . 1 Caution: • Mounting should be done by a qualified technician. • Make sure that the mounting (ceiling) area has sufficient strength. • Read the enclosed mounting instructions thoroughly before starting. • Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions. • When the product is no longer going to be used, have it disposed of quickly by a professional disposal service. Dimensions 5° Projector 432 (17) 65 ( 2-9/16 ) ∅8.5 ( ∅11/32) 25 ( 31/32) 70 ( 2-3/4) * From center of rotation to center of lens 114 (4-1/2) 207 ( 8-5/32) 184 (7-1/4 140 ( 5-1/2) ° 13 (1/2)* 3-∅9.5 ( ∅3/8 ) 160 ( 6-5/16 ) 10 9.5 ( 3/8 ) Attachment plate Attachement plate 15 ° 10 ° 153 ( 6-1/32) Illustration shows the bracket attached to a projector. 104 (4-3/32) 130 ( 5-1/8 ) 20 ( 2-9/16 ) 150 ( 5-29/32) unit : mm (inch) NOTE: This illustration is not drawn to scale. Weights and dimensions shown are approximate. Specifications subject to change without notice. As of March 2011 SFL11A004 1/1