Transcript
275_288_ISDN_telefon_2010_rip 26.05.2010 12:34 Uhr Seite 5 ISDN distributors, adapters / ISDN Verteiler, Adapter Mini ISDN-Verteiler 8/8 / mini ISDN distributor 8/8 zum Anschluss von mehreren ISDN-Endgeräten an einen ISDN-Anschluss, mit integrierten Abschlusswiderständen, 1:1 belegt, voll abgeschirmt to connect several ISDN devices at one ISDN outlet, with terminal resistors, wiring: 1:1, fully shielded SB-Verpackung/blister lose/in bulk T 314 T 314 L Ausgänge/outputs: 4-fach/4-way T 318 T 318 L Ausgänge/outputs: 8-fach/8-way ISDN-Telefonadapter / ISDN phone adapter Belegung nach IEC/Siemens Norm Western-Stecker 8/4 + TAE-Kupplung wiring acc. to IEC/Siemens standard modular plug 8/4 + TAE jack NFF NFN N-Norm N code F-Norm F code N-Norm N code N-Norm N code F-Norm F code F-Norm F code SB-Verpackung/blister lose/in bulk SB-Verpackung/blister lose/in bulk T 109/02 T 109/02 L T 110/02 - 0,2 m 0,2 m ISDN-Telefonadapter / ISDN phone adapter Belegung nach Telekom Norm Western-Stecker 8/4 + TAE-Kupplung wiring acc. to Telekom standard modular plug 8/4 + TAE jack NFF NFN N-Norm N code F-Norm N-Norm F code N code N-Norm N code F-Norm F code F-Norm F code SB-Verpackung/blister lose/in bulk SB-Verpackung/blister lose/in bulk T 111/02 - - T 112/02 L 0,2 m 0,2 m ISDN-Adapter/ ISDN adapter Dieser Adapter empfiehlt sich für den Anschluss von ISDN-Geräten an den So-Bus, wenn im Gerät oder Anschlussdose keine Widerstände eingebaut sind, mit 2 Abschlusswiderständen 100Ω Western-Stecker 8/4 + Western-Kupplung 8/4 This adapter is recommended for the connection of ISDN devices to the So-bus, the device itself or the wall socket do not dispose of resistors, with 2 terminating resistors 100Ω. modular plug 8/4 + modular jack 8/4 SB-Verpackung/blister lose/in bulk - T 93 L 279