Download Shuttle PV01 mounting kit

Product Specification
XPC Accessory PV01 – Installation Guide
c
d
Due to safety reasons, please turn off your computer
completely first and unplug it from the power supply.
Unscrew one screw of the stand mount
and remove the vertical stand.
Fasten the VESA MOUNT at rear of LCD
monitor with four screws.
As shown, install the XS35 in the VESA
MOUNT and push it towards the direction
as indicated by the red arrow.
g
Check that it is properly aligned, then
tighten securely with one thumbscrew.
Page 2 | 3 August 2010
www.shuttle.com
S h u t t l e C o m p u t e r H a n de l s G m b H
Fritz-Stras s man n -Str. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
[email protected]
©2009 by Shuttle Computer Handels GmbH (Germany). All Information subject to change without notice. Pictures for illustration puposes only.
f
e