Transcript
Manual Wall-Mounted Projection Screens Silhouette Series With a High-Tech Appearance Features • The Silhouette’s case conceals everything: mounting fixtures, fasteners, and even the dowel retracts inside the case • The innovative case installs cleanly, and the front fascia removes easily for access to the inside components. • Its slender fascia and endcaps are made of gently radiused aluminum and presents a strikingly modern appearance. • There is no need to conceal the Silhouette—it will complement the other high-tech equipment in your room. Silhouette/Series M—is spring-roller operated. Your choice of a conventional viewing surface: Matt White, Glass Beaded or High Contrast Grey. Silhouette/Series M Silhouette/Series C—is operated by a slim, polished aluminum crank, which may be detached for storage. Features Draper’s Tab Tensioning System for a perfectly flat projection surface. Choose M1300, M2500, HiDef Grey or Cineflex rear projection viewing surface. See page 10 for more on the benefits of Tab Tensioning. Options • AutoReturn Roller—The screen unrolls in the conventional manner, then slowly and gently retracts after a simple tug on the handle. See lower left for more details. • Case Finishes—Choose a white (standard), black or dove grey lightly textured finish (see samples shown on the left) Silhouette/Series C Autoreturn Introducing an important new improvement in spring roller design Now available as an optional upgrade on selected models of Draper wall- and ceiling-mounted screens, the AutoReturn spring roller includes a built-in inertia reduction mechanism. With AutoReturn the screen unrolls in the conventional manner, then slowly and gently retracts to the closed position on its own after a simple tug on the handle. AutoReturn is available on Salara/ Series M, Silhouette/Series M, Access/Series M, Luma 2, and Luma. Patent Pending. • Extra Drop—Up to 8´ overall height, either white or black (White is standard for Series M in AV format. Black is standard for Series M in all other formats and for all Series C screens). • Black Masking Borders—Borders are optional for Series M in AV format. Borders are standard for Series M in all other formats and for all Series C. Sizes and Formats AV Format from 50˝ x 50˝ to 96˝ x 96˝ NTSC Format from 6´ to 10´ diagonal HDTV Format from 65˝ to 106˝ diagonal 16:10 Format from 67˝ to 109˝ diagonal WideScreen Format in 99˝ or 108˝ diagonal Custom sizes available. Full details available at: www.draperinc.com/go/SilhouetteM.htm www.draperinc.com/go/SilhouetteC.htm U.S. Patent No. 5,296,964 and 6,111,694. 32 www.draperinc.com | 1-800-238-7999