1
Download DoubleSight DS-EXT3 mounting kit
Transcript
Model: DS-EXT3 3” Height Extension for DoubleSight Multi Monitor Flex Stands Compatible with Flex Stand Models: DS-130STB, DS-219STA, DS-219STB, DS-224STA, DS-319STA, DS-424STA Compatible with Tier Extension Models: DS-21T, DS-22T, DS-23T Package Contents : POLE ADAPTER (1EA) 3/4” SCREWS (2EA) HEIGHT EXT (1EA) M6-80 BOLT (2EA) 5mm WRENCH (1EA) (ALL MODELS) Installation for Flex Stands : 1 - Remove existing base from Flex Stand. Remove Monitors from your stand and lay stand on flat surface to reveal the underside of the stand base. Use the 4mm which was included with the Flex Stand to remove the (2) screws in the bottom of the base. Set screws aside for step 4 - final installation. 2 - Install Pole Adapter Using the (2) 3/4” screws, attach the Pole Adapter to the bottom end of the stand pole. Use the 4mm wrench to tighten the screws. 3 - Install Height Extension Module. Using the enclosed 5mm wrench, attached the Height Extension to the bottom of the Stand Pole with the (2) enclosed bolts (M6-80). Zoom 4 - Reinstall Flex Stand Base Reattach the original stand base to the bottom of the Stand Pole which now has the Height Extension installed. Installation for Flex Tier Extension Models: 1 - Uninstall Extension Post Detached Tier Extension from your Flex Stand and remove the Extension Post. Skip this step if Product is new Post has not been previously installed. 2 - Install Height Extension Module Using the enclosed 5mm wrench, attach the Height Extension to the bottom of the Stand Pole with the (2) enclosed bolts (M6-80). 3 - Install Pole Adapter Using the (2) 3/4” Screws, attach the Pole Adapter to the end of the Height Extension Module and tighten with 4mm wrench originally provided with your Tier Extension. 4 - Re-Install Extension Post Use the original (2) Bolts (M6-80) to attach the Extension Post to the end of the Pole Adapter. You are now ready to attach your Tier Extension to your Flex Stand. Follow directions provided with Tier Extension. Service & Support t: 888.897.8869 e: [email protected]
