Download Intel Core i5-2500
Transcript
Power Management 4.2.2 Low-Power Idle States When the processor is idle, low-power idle states (C-states) are used to save power. More power savings actions are taken for numerically higher C-states. However, higher C-states have longer exit and entry latencies. Resolution of C-states occur at the thread, processor core, and processor package level. Thread-level C-states are available if Intel Hyper-Threading Technology is enabled. Caution: Long term reliability cannot be assured unless all the Low Power Idle States are enabled. Figure 4-1. Idle Power Management Breakdown of the Processor Cores Thread 0 Thread 1 Thread 0 Core 0 State Thread 1 Core 1 State Processor Package State Entry and exit of the C-States at the thread and core level are shown in Figure 4-2. Figure 4-2. Thread and Core C-State Entry and Exit C0 MWAIT(C1), HLT MWAIT(C1), HLT (C1E Enabled) C1 C1E MWAIT(C6), P_LVL3 I/O Read MWAIT(C3), P_LV2 I/O Read C3 C6 While individual threads can request low power C-states, power saving actions only take place once the core C-state is resolved. Core C-states are automatically resolved by the processor. For thread and core C-states, a transition to and from C0 is required before entering any other C-state. 46 Datasheet, Volume 1