Download Intel SC5250-E computer case

System Cooling
Intel® Entry Server Chassis SC5250-E
Figure 9. Processor Wind Tunnel Illustration with Intel® Xeon™ Processor with 533MHz System
Bus Speed
4.4
Intel® APTWKTCOOLKIT for SE7505VB2 Intel® Server Board
Configuration
The Workstation Cooling Kit was designed to work with the Intel Server Board SE7505VB2 and
Intel Server Chassis SC5250-E, to dramatically reduce system level acoustics making it an
effective solution when acoustics is a concern. Intel product code APTWKTCOOLKIT (Intel MM
# 858795).
Bios version 1.08 or newer is required for proper performance. In addition, it is recommended
that system fans be connected to the Intel® server board SYS Fan header #1 and SYS Fan
header #3 for the chassis fans. BIO 1.08 includes support for new APWKTCOOLKIT for
SC5250-E configurations and SE7505VB2.
BIOS 1.08 with SE7505VB2 Fab -701 or later on SC5250-E only, requires BIOS system set up
configurations via BIOS “Setup Configuration Utility”. Settings must be configured as follows:
Select “Advanced” menu option, Select "Hardware monitor" option, Select "Chassis Type," and
select "SC5250-E” for Pilot Point 1 configurations.
Revision 1.02
12
Intel order number C32881-001