Transcript
Wireless Headset Adapter DESCRIPTION: The Wireless Headset Adapter for snom is an electrical interface adapter that provides an interface between a snom VoIP telephone and a cordless headset unit. With the adapter installed the user is enabled to answer and terminate telephone calls using the headset, while being away from the desk. Incoming calls are also signalled in the headset earpiece. • Snom partnumber: • Extension Panel: Yes 00001203 – Adapter can co-exist with extension panel • Fonewise partnumber: • Firmware: VS10a - Min. requirement: 6.5.5 • Phone Support: - Recommended: 7.x + bootloader - snom300: Yes – Version 2 only • Dimensions (Unit): - snom320/360/370: Yes 70 x 41 x 23 mm, 32 g - snom820: Yes • Dimensions (Packed): • Headset Support: 165 x 95 x 45 mm, 120 g - GN Netcom Jabra: Yes - Plantronics: Yes - Sennheiser Communications: No snom technology AG Charlottenstraße 68–71 10117 Berlin tel/enum: +49 30 39833-0 fax: +49 30 39833-111 sip: [email protected] mail: [email protected] Version 1.0 / en / 04-2009 Copyright © 2000 – 2009 snom technology AG. All rights reserved. snom is a registered trademark of snom technology AG and its affiliates in Germany, USA and certain other countries and regions. Unless specified otherwise, all trademarks, in particular product names, in this document are legally protected trademarks of snom technology AG. Other trademarks or registered trademarks mentioned in this document are the property of their respective m anufacturers or owners. Product specifications contained in this document are subject to change without notice.