Download HP NN124AA rack console
Transcript
Using the mounting reference guide 1. Choose the appropriate mounting reference guide. ● The HP Z600 Workstation requires a 4U space. The center of the rails (1) is 2U from the bottom of the rack (or from the top of a previously-installed unit). ● The HP Z800 Workstation requires a 5U space. The center of the rails (1) is 3U from the bottom of the rack (or from the top of a previously-installed unit). 2. Measure from point (2), the lower surface of the workstation to point (1), the location of the center line of the slides. The top surface of the workstation is at point (3). 3. Mark the location for the center line of the slides (1). 4. Mount the rails on the rack. Figure 12 Mounting reference guides 4U Mounting reference guide 5U Mounting reference guide HP Z600 Workstations HP Z800 Workstations Step 5—Reassembling the workstation ENWW 1. Reconnect external devices and power cords. 2. Restore power to the workstation and all external devices. Step 5—Reassembling the workstation 11