Download Alpine PMD-B200P
Transcript
PMD-B200P Version 2.0 Owner’s Manual 5. Tap the button. • If only a few intersecting streets exist, their list appears immediately. • In case of a longer street, a keyboard screen appears. Start entering the name of the intersecting street on the keyboard. As you type, if the matching streets can be shown on one screen, their list appears automatically. 6. Tap the desired intersecting street in the list. 7. The map appears with the selected point in the middle. Tap then automatically calculated, and you can start navigating. . The route is 7.1.2.5 Selecting a city centre as the destination The City Centre is not the geometric centre of the settlement but an arbitrary point the map creators have chosen. In towns and villages, it is usually the most important intersection; in larger cities, it is an important intersection. , , . 1. Tap the following buttons: 2. By default, Alpine Navigation Software proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list. 3. If needed, change the settlement: • To select the settlement from the list of recently used ones, tap the • To enter a new settlement: 1. Tap the button with the name of the settlement, or if you have changed the . country/state, tap 2. Start entering the settlement name on the keyboard. 3. Get to the list of search results: 4. • After entering a couple of characters, the names that match the string appear in a list. • Tap automatically. to open the list of results before it appears Select the settlement from the list. 4. Tap the 5. The map appears with the selected point in the middle. Tap then automatically calculated, and you can start navigating. 36 button. button. . The route is