Download Smeg LI915NS sink

Transcript
IRIS – Installation GUIDE
IRIS – Istruzioni di installazione
1700389
EN
Page 2/9
IRIS Range
Technical Document for Installation Procedures
1. Introduction
This document describes installation procedures for IRIS range, namely models:



IR902ISC (double bowl),
IR901ILSC & IR901IRSC (single bowl, left hand drainer & right hand drainer),
IR9015ILSC & IR9015IRSC (1 bowl &1/2, left hand drainer & right hand drainer).
Because of the low room available underneath, some specific solutions have been developed, in order to semplify
installation operations.
2. Cabinet Sizes
This range is suitable for following cabinets:



IR902ISC: minimum cabinet size 900 mm
IR901ILSC, IR901IRSC: minimum cabinet size 450 mm
IR9015ILSC, IR9015IRSC: minimum cabinet size 800 mm
3. Cut out sizes
480 X 860 mm
Warning:

Size 860 mm is bigger than usual (usual is 480 x 840)
4. Installation of IRIS single bowl or 1 bowl & 1/2 – (IR901ILSC & IR901IRSC, IR9015ILSC & IR9015IRSC )
Long sides
N° 4 fixing clips code 1410194 per side
EN
1700389
EN
Page 3/9
Drainer side and bowl side when there isn’t the cabinet wall
Bridge to be used only for low thickness worktop.


n° 3 fixing clips (code 1410212) drainer side
N° 2 fixing clips (code 1410212) bowl side
Bowl side when there is the cabinet wall


N° 2 fixing clips (code 1410211) per side
N° 2 Hooks (code 2740469) per side
Drainer side when there is the cabinet wall

N° 3 fixing clips (code 1410211 )
EN
1700389
EN
Page 4/9
TOTAL :




N° 8 fixing clips code 1410194
n° 5 fixing clips code 1410212
N° 2 Hooks code 2740469
N° 5 fixing clips code 1410211
5. Installation of IRIS double bowl (IR902ISC)
Long sides

N° 4 fixing clips code 1410194 per side
Bowl side when there isn’t the cabinet wall
Bridge to be used only for low thickness worktop.

1700389
n° 2 fixing clips code 1410212 per side
EN
Page 5/9
EN
Bowl side when there is the cabinet wall

N° 2 fixing clips code 1410211 per side

N° 2 Hooks code 2740469 per side
TOTAL :




1700389
N° 8 fixing clips code 1410194
n° 4 fixing clips code 1410212
N° 4 Hooks code 2740469
N° 4 fixing clips code 1410211
EN