Download E-flite EFL7150

EN
SAFE® Technology Flight Modes
This aircraft has 2 selectable flight modes and a Panic Recovery feature. It is
extremely important to follow the Transmitter Setup section of this manual
before binding your transmitter to this aircraft .
2 Position Gear/Ch 5 Switch Transmitters
DX6i and DX5e,
DX4e (older versions)
Precision Mode:
This mode uses low rates and low gains to deliver precise response at high
airspeeds. Use this mode to trim the aircraft and fly fast precision maneuvers.
Precision Mode (Low Rate)
Position 0 is Precision Mode
3D Mode:
This mode uses high rates and high gains to deliver extreme maneuverability
with maximum stability at low airspeeds. Use this mode for slow flying and 3D
maneuvers such as Hovers and Harriers. Flying at high speed in this mode
could cause oscillation.
3D Mode (High Rate)
Position 1 is 3D Mode
Important: DX6i ch5 has to be reversed.
3 Position Gear/Ch 5 Switch Transmitters
DX4e, DX5e, DX6,
DX7S, DX8, DX9,
DX18, DX10t
Precision Mode (Low Rate)
Positions 0 and 1 are
Precision Mode
3D Mode (High Rate)
Position 2 is 3D Mode
Panic Recovery Mode
If you feel you have lost control of the aircraft (in any mode), hold the Panic
Recovery button/switch. The SAFE technology will return the aircraft to upright
flight.
Always fly at a safe altitude, as Panic Recovery may cause the aircraft to lose
altitude while returning to upright flight. Release the Panic Recovery button/
switch to turn off Panic mode and return to the current SAFE flight mode with
full stick control again.
IMPORTANT: If the aircraft is upside down when the Panic Recovery button/
switch is pressed, sufficient altitude may be required for the aircraft to return
to upright flight.
4
CH 5
DX4e shown. Panic Button /
Switch may vary depending
on Transmitter model. See
Transmitter setup for more
info.