Download Miele TKR 650 WP
Transcript
Problem solving guide Other problems Problem Cause and remedy The drying process goes on too long or even switches off * The room in which the dryer is located is too warm. Ventilate the room thoroughly. Detergent residues, hair and fine fluff can clog the filters. Clean the fluff filters and the plinth filter. Remove any visible fluff: . . . bottom left, from behind the panel in the heat exchanger cavity (see "Cleaning and care"); . . . from the cooling fins behind the grille bottom right (see the end of this section). The cool air intake (bottom right grille) is blocked. Move any objects, such as a laundry basket, away from the dryer. The fluff filters and the plinth filter were wet when replaced. The fluff filters and the plinth filter must be dry. The laundry is too damp. Spin using a higher spin speed in the washing machine. The tumble dryer has been overloaded Do not exceed the maximum load for the programme selected. Metal zips have prevented the dryer from registering the correct moisture level. Open the zips next time. If the problem recurs, dry these items using the Warm air timed drying programme. * Before starting another programme: Switch the dryer off and then on again. 62