Download Miele TKR 650 WP

Installation and connection
Rear view
 If transporting the dryer at an
angle, only tip towards the left side.
a Protruding lid for holding when
moving the dryer (see arrows)
b Accessories for external drainage of
condensed water: hose clip, adapter
and hose holder
c Hose for external drainage of
condensed water
d Mains connection cable
Transporting the dryer
To manoeuvre the dryer out of its
packing case to its installation site, hold
it by
– the front feet
– and the lid where it protrudes at the
back of the appliance.
 Only transport the dryer as
shown in the following illustrations.
 If the tumble dryer has not been
transported as described, then it
must be left to stand for at least 1
hour before it is connected to the
electricity supply.
Otherwise the heat pump can be
damaged.
69