Transcript
INSTALLATION: 1. REMOVE ORIGINAL TILT-SWIVEL FROM DMM DOOR. 2. INSTALL C-MD-208 USING THE ORIGINAL 1/4-20 HEX HEAD SCREWS, WASHERS AND FLANGED NUTS. INSTALL EQUIPMENT TO ROTATING PLATE. 3. 1.96 6.89 NOTE: MOUNTING HOLES MAY BE ACCESSED BY ROTATING THE PLATE, OR THE ROTATING PLATE MAY BE REMOVED FROM THE ASSEMBLY TO ALLOW EASIER INSTALLATION OF THE EQUIPMENT. 4. 6.19 POSITION EQUIPMENT AS DESIRED. 5.17 2.75 .265 THRU 4X 2.13 SQ. BOLT PATTERN SPRING WASHER 1/4-20 NUT, NYLOCK .163 THRU 4X AMPS BOLT PATTERN 1/4" FLAT WASHER 4X .213 THRU VESA 75MM BOLT PATTERN 1/4" PLASTIC WASHER SANDWICH WASHER ROTATING PLATE C-DMM-123 (SHOWN FOR REFERENCE) HAVIS, INC. TITLE: 4X 1/4-20 X 1/2 HEX HEAD BOLT AND WASHER. 75 JACKSONVILLE RD, WARMINSTER, PA. 18974 1-800-524-9900 INSTALLATION INSTRUCTION, C-MM-304 DO NOT SCALE DRAWING SIZE A DWG. NO. C-MM-304-INST WEIGHT (LB): 0.78 SCALE: 1:4 REV 7-14 SHEET 1 OF 1
