Download KOAMTAC KDC300M-SR

KDC User Manual
BARCODE & SCAN OPTIONS
koamtac.com
Equation to Determining Potential Number of Stored Barcodes
The number of barcodes that can be stored in the KDC memory depends on the size of
the barcodes.
Example: If only UPCA barcodes are scanned and the check digit is not transmitted,
then each barcode takes up 11 (barcode data) + 2 (added bytes) + 2 (length and type) + 4
(time stamp) = 19 bytes. The maximum number of UPCA barcodes that can be saved is
204,800/19 =10,778. However, KDC has limited the maximum number of barcode to
10,240 and users cannot store more than 10,240 barcodes in 2.85/86 version. 3.0x version
allows the user to store maximum 204,800 barcodes.
Data Buffer Full
When the data buffer is full, the KDC displays a message, Buffer Full, ignoring any
command to scan barcodes. The user must reset the data buffer to continue data
collection.
133
Revision 3.05.R8.
Copyright®2014, KOAMTAC, Inc.