Download Promate bluPen.2
Transcript
bluPen.2 Multifunctional Bluetooth™ Stereo Mini-Handset with Stylus Pen User Guide Introduction Thank you for purchasing Promate bluPen.2 Multifunctional Bluetooth™ Stereo Mini-Handset with Stylus Pen. This mini-handset has been created with multiple functions, perfect power and sync quality, ultra-high reliability and uniquely fined outlook. Hereby stated are the features for this product for better understanding of its functions. • Stereo Bluetooth™ mini-handset • Detachable conductive silicone stylus pen • Multifunctional buttons for call, tracks and volume controls • High-quality audio earphones • Dual ultra-sensitive microphone • Vibration mechanism for incoming call • 5th Gen CVC® Noise suppression and echo cancellation • Dual-microphone audio algorithm offering enhanced near and far noise reduction • Make, receive and cancel calls all while listening to music • Compatible with smartphones, tablets and all Bluetooth™ enabled audio devices • Exquisite, pocket friendly and mini design for ultimate portability Packaging Contents • bluPen.2 • Micro-USB cable • Earphones with earbud replacements • Stylus tip • User Guide • Warranty card Precautions Please read this User Guide carefully before using the product. The contents herein may be changed to deliver the better services to the end-user. To keep the perfect performances of the product, never use it in cold, hot, dusty or moistened areas or places, especially in the following conditions: 1. Moist or underwater conditions. 2. Conditions near the heater or high-temperature service. 3. Conditions with direct sunshine. 4. Conditions with apt falling. 5. Never dismantle the product without due permission, otherwise it may nullify the warranty clauses. 1. Product Overview Introduction The bluPen.2 is a multifunction gadget built for touch-screen smartphones and tablets. Bluetooth™ pairing with the device, the bluPen.2 serves primarily as a call handset using its ultra-sensitive mic and in-built stereo mini-speaker. Enhances the audio with its included earphones and specially designed 5th Gen CVC® CSR chipset for superb noise suppression and echo cancellation for a crystal clear sound quality. bluPen.2 also carries a vibration mechanism for a quiet incoming call notification. Its secondary feature allows the device to be a conductive stylus pen by replacing its tip and use it for any touch-screen devices for a more precise swiping, drawing or even writing. The bluPen.2 is simply a complete solution for touch-sensitive mobile and tablet devices. 2. Appearance and Interface Description 1 3.5mm audio jack 2 Microphone 3 Status indicator 4 Volume +/- 5 Charging jack 6 Capacitive stylus 7 Microphone 8 Multifunction button 9 Dustproof receiver 3. Instructional Usage 3.1 Charging 1. Connect the Micro-USB charging cable on the charging port. 2. Red LED lit up to shows it is charging. 3. Red will turn into blue once fully charged. 3.2 Pairing 1. Press and hold the multifunction button about 7 seconds to switch on the mini-handset, it automatically enters the pairing mode. The red and blue indicator lights flashes alternately. 2. Activate the Bluetooth™ feature on your phone or other Bluetooth™ devices and set it 3. Select "bluPen.2" from the list of found devices on your phone or other Bluetooth™ to search for new Bluetooth™ devices. devices and connect. If necessary, enter passcode 0000 to pair and connect the headset to your device. Now you can use bluPen.2 for phone calls or listening to music. 3.3 Basic Operation Function Receive a call End a call Reject a call Operation Short press any key to answer the call Short press the multifunction button Long press the vol - or vol + button for 2 seconds LED status Alerts Explanation Blue Constinuous sound and vibration alert N/A N/A N/A With beep alerts With continuous prompt tone for incoming call Or end the call with the mobile device Long press the vol - or vol + button for 2 seconds The mobile will redial the last dialled by double short press the multifunction button This function depends if supported by the mobile device Call will be transferred to the mobile device, audio will automaticall transferred back to bluPen.2 after ending the call Mute mode will stay until the end of the call Short press the vol + button to increase the volume Short press the vol button to decrease the volume Last number redial Double short press the multifunction button N/A N/A Voice dial Press the vol - and vol + simultaneously N/A N/A Call transfer to mobile device Long press the vol - button for 2 seconds N/A N/A Mute mode Long press the vol + button for 2 seconds N/A N/A Volume up Short press the vol + button N/A N/A Volume down Short press the vol button N/A N/A Previous song Long press the vol - button for 2 seconds N/A N/A Next Song Long press the vol + button for 2 seconds N/A N/A Music pause/play Press the multifunction button to pause/play the music N/A N/A Headset reset On standby status, press and hold the multifunction button and connect the charging cable N/A N/A Battery low alerts N/A Red LED flashes every 8 seconds Will beep every 30 seconds Delete paired devices list Press the vol - and vol + simultaneously, after 4 seconds, connect the charging cable Blue LED flashes 3 times Long press the vol - button to go to the previous song Long press the vol + button to go to the next song Music will pause after short press of the multifunction button, and press again to play Press and hold the multifunction button and connect the charging cable while the mini-handset is on Flashes Red LED when battery is low The paired devices list will be deleted