1
Download VIVOTEK IP8130 surveillance camera
Transcript
VIVOTEK ■ Event name: Enter a name for the event setting� ■ Enable this event: Select this option to enable the event setting� ■ Priority: Select the relative importance of this event (High, Normal, or Low)� Events with a higher priority setting will be executed first. seconds: Enter the duration in seconds to pause ■ Detect next motion detection or digital input after motion detection after a motion is detected� This can prevent event-related actions to be too frequently performed� 1� Schedule Specify the period of them during which the event trigger will take place� Please select the days of the week and the time in a day (in a 24-hr time format) for the event triggering schedule� 2� Trigger This is the cause or stimulus which defines when to trigger the Network Camera. The trigger source can be configured to use the Network Camera’s built-in motion detection mechanism or external digital input devices� There are several choices of trigger sources as shown on next page� Select the item to display the detailed configuration options. ■ Video motion detection This option makes use of the built-in motion detection mechanism as a trigger source� To enable this function, you need to configure a Motion Detection Window first. For more information, please refer to Motion Detection on page 106 for details� ■ Periodically This option allows the Network Camera to trigger periodically for every other defined minute. Up to 999 minutes are allowed� ■ Digital input This option allows the Network Camera to use an external digital input device or sensor as a trigger source� Depending on your application, there are many choices of digital input devices on the market which helps to detect changes in temperature, vibration, sound, and light, etc� ■ System boot This option triggers the Network Camera when the power to the Network Camera is disconnected� ■ Recording notify This option allows the Network Camera to trigger when the recording disk is full or when recording starts to rewrite older data� 94 - User's Manual
