Download Supermicro X10SAE

Chapter 2: Installation
Internal Buzzer (SP1)
Internal Buzzer
Pin Definition
The Internal Buzzer (SP1) can be
used to provide audible indications for
Pin#
various beep codes. See the table on
the right for pin definitions.
Pin 1
Pos. (+)
Beep In
Pin 2
Neg. (-)
Alarm
Speaker
Definitions
Speaker Connector
Pin Definitions
Pin Setting
Definition
Pins 3~4
Internal Speaker
Pins1~4
External Speaker
Speaker (JD1)
On the JD1 header, pins 3~4 are used
for internal speaker. Close pins 3-4
with a cap to use the onboard speaker.
If you wish to use an external speaker,
close pins 1-4 with a cable. See the
table on the right for pin definitions.
USB 2/3
USB10/11(3.0)
JPL2
HDMI/DP
HD AUDIO
JSPDIF_OUT
LAN2
JHD_AC1
KB/MOUSE
AUDIO FP
JPAC1
VGA/DVI
USB 0/1
LAN1
FAN5
JVR1
FAN4
SLOT7 PCI-E 2.0 X1
SLOT6 PCI-E 3.0 X16
SLOT5 PCI-E 2.0 X1
SLOT4 PCI-E 3.0 X8 (IN X16)
SLOT3 PCI-E 2.0 X1
SLOT2 PCI 33MHz
SLOT1 PCI 33MHz
J1394_1
J1394_2
JPW2
JPL1
JI2C1
JI2C2
COM1
X10SAE
CPU
Rev. 1.01
JPI1
COM2
BAR CODE
FAN1/CPU FAN
1394 CODE
BIOS
LICENSE
JWD1
JWOR1
JSTBY1
LV33
MAC CODE
Always populate blue sockets first;
Unbuffered ECC/Non-ECC DDR3 DIMM required
JPME2
JSD1
I-SATA0
I-SATA2
I-SATA4
JTPM1
Intel PCH
I-SATA1
I-SATA3
I-SATA5
JBR1
DIMMB2
A
B
JVR2
BIOS
A-SATA0
A-SATA1
USB12/13(3.0)
JD1
JPW1
FAN2
JLED1
SP1
FAN3
JF1
LED1
T-SGPIO2
T-SGPIO1
USB4/5 USB6/7 USB8/9 JL1
USB 14/15(3.0)
DIMMA1
DIMMA2
DIMMB1
JBT1
2-27
A. Internal Buzzer
B. Speaker Header