Transcript
Installation Lithium-ion Battery Case for Galaxy S3 Quick Start Guide Sleek hardshell case provides added protection against drops and scratches Fast Charging Lithium-ion battery (2300mAh) doubles the battery life of your Galaxy S3. Simply slide your S3 into the case and ensure the S3 is well connected to the micro USB connector. aluratek.com AGPC03W qsg Q10309 LED battery status indicator tells you exactly how much power is left Copyright © 2013 Aluratek, Inc. All Rights Reserved. Charging No need to take the Galaxy S3 out of the case. Simply use the included Micro USB cable and plug into any USB port on your computer or the orginal iPhone power adapter (not included). The LED’s located on the back of the device will blink when charging. The capacity is shown by the number of LED’s. When the case is powered on, the Galaxy S3 is charging and/or using the power from the case battery. If the Galaxy S3 is drained of power, the case will first charge your Galaxy S3. If the Galaxy S3 is fully charged, the battery will drain from the case battery first before using the Galaxy S3’s battery. To check the battery status, press the button located on the back of the case. Four LED’s means the case is fully charged, and one LED means it is almost empty. Tech Support & Warranty Information If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device. E-mail: [email protected] Web: www.aluratek.com/support Local (Tustin, CA): 714-586-8730 Toll free: 1-866-580-1978 Aluratek warrants this product against defect in material or workmanship for 1 Year from the date of purchase. For more information, please visit: http://aluratek.com/warranty-return-policy You can register your product online at: http://aluratek.com/product-registration