Download Samsung SR8950

maintain tools and filters
CLEANING THE VACUUM CLEANING ROBOT
Please keep the cleaning and maintenance methods in mind
04 MAINTAIN
■ When the Power Switch is damaged, please contact the service
agent so that it does not cause any accidents.
■ Do not use any means or mechanical devices not installed by the
manufacturer that could accelerate the deformation of the vacuum
cleaning robot.
■ Always turn off the power switch at the
bottom of the main unit before cleaning
the vacuum cleaning robot. The vacuum
cleaning robot could operate suddenly and
cause an injury.
Cleaning the Sensor Window and the Camera
You must turn off the Power Switch at the bottom of the main
unit before cleaning the vacuum cleaning robot.
■ Never spray water, thinner, benzene etc. directly onto the main unit
of vacuum cleaning robot.
■ Lightly wipe the sensor window or camera
using a soft cloth.
Camera
Front Sensor window
Front Sensor Window and
Camera
Cliff Sensor Window
Rear Sensor Window
maintain _37
DJ68-00633G(0.1).indd 37
2012.6.8 9:11:54 AM