Download Eaton Network Card-MS

Configuring the Card
Notified Applications
Use the Notified Applications page to:
l
Display network management system (NMS) applications set to receive notifications from the card. All
applications and their main parameters display.
l
Add an NMS to notified applications.
l
Test the operation of a notified application.
NOTE
Network Shutdown Module and NetWatch (on protected server boot) are protection
applications that subscribe automatically to the Notified Applications list
(see “Protection Applications” on page 74 for more information).
Select Notified Applications from the menu bar to open the Notified Applications page (see Figure 32).
Figure 32. Notified Applications Page
The Notified Applications page displays the following parameters:
l
l
l
Check box: Enables users to select one or more applications. Select All to select or clear all check boxes
simultaneously.
Nr: Provides the assigned application number.
Hostname or Address IP: By priority, the host name of the computer is displayed when the IP address can be
converted into a host name by a Domain Name System (DNS) server, or if the application has been entered
as a host name.
l
Application Name: Provides the user-assigned name.
l
Output: Provides the name of the UPS output from which the client is powered.
Eaton Network Card-MS User’s Guide P-164000100—Rev 1 www.eaton.com/powerquality
40