Transcript
Instruction manual KT-100 To programm: 1. Press the MIN and SEC buttons and input the chosen time Starting the timer: 2. After inputting the time press the START/STOP button. 3. The timer runs to 00:00, then the alarm sounds for 30 seconds 4. The alarm can be stopped by pressing the START/STOP button. Reprogramming or stopping the timer during operation: 5. The timer can be stopped or reprogrammed at anytime. Restart by pressing the START/STOP button. 6. To reset to 00:00, press the MIN and SEC button at the same time. Repeating the same countdown: 7. By pressing the START/STOP button after the alarm has stopped, the countdown will restart.