Download Intel S5500HV

Driver Installation
7. Locate the RAID driver and place a blank, high-density floppy disk into the floppy disk
drive.
8. Press <Enter>.
9. Follow screen instructions to create the driver disk.
8.1.1.2
Creating a RAID driver disk from a Microsoft Windows*
environment:
1. Start Microsoft Windows*.
2. Place the Resource CD into the optical drive.
3. Go to the Make Disk menu, and then select the type of RAID driver disk you want to
create.
4. Insert a floppy disk into the floppy disk drive.
5. Follow the succeeding screen instructions to complete the process.
NOTE: Write-protect the floppy disk to avoid a computer virus infection.
8.1.1.3
Creating a RAID driver disk from a Red Hat* Enterprise Linux
server environment:
1. Insert a blank formatted high-density floppy disk to the floppy disk drive.
2. Decompress the file into the floppy disk from the following path in the support DVD:
Example: For the LSI* Logic Embedded SATA RAID Driver:
\Drivers\ICH10R LSI RAID\Driver\makedisk\Linux
3. Eject the floppy disk.
8.1.2
8.1.2.1
Installing the RAID Controller Driver
Microsoft Windows Server* Operating System
During the Microsoft Windows Server* operating system installation:
To install the RAID controller driver when installing the Microsoft Windows Server*
operating system:
1. Boot the computer using the Windows® Server installation DVD. The Windows® Server
Operating System Setup starts.
Figure 141. Microsoft Windows Server* Setup Menu
2. When prompted, Press <F6> to install a third-party driver.
94
Intel® Server System SR1670HV Service Guide