Download Philips CD2801W

Caution
•• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
•• Use only the supplied batteries.
•• Risk of decreased battery life! Never mix
different brands or types of batteries.
Set the country/language
Select your country/language, then press [OK]
to confirm.
»» The country/language setting is saved.
Note
•• The country/language setting option is
country dependent. If no welcome message
is displayed, it means the country/language
setting is preset for your country. Then you
can set the date and time.
Warning
•• Check the battery polarity when inserting in
the battery compartment. Incorrect polarity
may damage the product.
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
Set the date and time
Tip
•• To set the date and time later, press [Back] to
skip this setting.
1
2
Configure your phone
(country dependent)
1
2
When using your phone for the first time,
you see a welcome message.
Press [OK].
3
Select [Menu] > [Phone setup] > [Date
& time], then press [OK] to confirm.
Press the numeric buttons to enter the
date, then press [OK] to confirm.
»» The time setting menu is displayed on
the handset.
Press the numeric buttons to enter the
time.
Note
•• If the time is in 12-hour format, press
select [AM] or [PM].
4
/
to
Press [OK] to confirm.
EN
11
English
Install the handset