Download Marmitek Proguard800

Transcript
Quick Reference Guide
Function
Press…
OR
ARM
If “One-Key Arming” is disabled enter your user
code when arming.
The default Master code is 1234.
OR
Hold down this key until
“Instant Arming OK?” is
displayed. Then Press 9.
INSTANT ARM
DISARM
Additional Information
Entering your user code also silences the siren in
the event of an alarm.
[USER CODE]
PANIC
ALARM
+
FIRE
ALARM
+
MEDICAL
ALARM
+
Instant arming cancels the entry delay after Part
or Perimeter arming. This feature can be enabled
by your installer.
Press these keys together and hold them down to
generate an alarm.
MENU MODE
then [USER CODE]
Use the menu navigation keys (/) until the
required menu item is displayed then press 9.
Alternatively, enter the shortcut (e.g. 21 for
Bypass Zones).
CHECK
TROUBLE
CONDITIONS
Use this key scroll the
system trouble list
Pressing also silences any trouble tones that
may be sounded by the system.
SWITCH HA
UNIT ON
then [HA UNIT #]
SWITCH HA
UNIT OFF
then [HA UNIT #]
Enter the HA module number in two digits
(e.g. 03).
Hold down this key until
“Service Call Dialing” is
displayed.
The number dialed for the service call is
programmed by your installer.
GLOBAL
CHIME
then
Use the menu navigation keys (/) to choose
enable or disable, then press 9.
RECORD
MESSAGE
then
After recording a message, “Message Waiting” is
displayed until the message is played back.
PLAY
MESSAGE
then
The Message Center is an optional feature that is
included with certain versions of ProGuard800.
SERVICE CALL
Telecontrol Commands
Function
Press…
Function
2-WAY AUDIO
DISARM
FULL ARM
SIREN CANCEL
HA UNIT XX ON
then
EXTEND CALL
HA UNIT XX OFF
then
DISCONNECT
ProGuard800™
Press…
then
-3-