Download Datamax O'Neil E-Class Mark III E-4206P

D
D..2
2 A
on
n
Ad
dv
va
an
ncce
ed
dF
Fiille
eH
Ha
an
nd
dlliin
ng
g IIn
nffo
orrm
ma
attiio
84
•
The standard printer leaves the factory with EFIGS loaded into Module Y. At this point, Module Y is
LOCKED and will only accept additional language downloads.
•
After downloading a language update, Module Y is left UNLOCKED until the printer is reset or power is
cycled. In this state, Module Y will accept font, image and label format downloads. The module will
also honor the Clear Module request. Therefore, following an update it is recommended that a reset be
performed to lock the module; otherwise, a software package may “Clear All Modules” thus destroying
the new menu language(s).
•
Module Y can be UNLOCKED by sending this DPL string:
•
To restore the factory generated EFIGS image, download the file *832296.01A to the printer. This file
is located on the Datamax-O’Neil FTP site. The letter at the end of the file name (e.g., A) specifies the
revision. The latest revision will be available on the FTP site.
•
Downloading the same language twice will automatically delete the first occurrence, but will not free
the memory space.
•
Deletion of the selected language will reset the printer to English. The total number of languages that
the printer can now accept is limited to 10, but this number is dependent upon the size of each
language translation. The translation size will vary with the number of messages that are translated
for that particular language. Current complete language files are about 7,000 bytes each; but with
product growth, the total number of languages is expected to drop to five.
<STX>KpY0
Appendix D – Menu Language