Download Benq W6000 data projector

Transcript
English
Resetting the lamp timer
Do not reset the lamp timer if the lamp has not been replaced as this could cause damage.
1. After the start-up logo, press MENU and then press / until the
Advanced Setup menu is highlighted.
2. Press to highlight Lamp Settings and press ENTER. The Lamp
Settings page displays.
3. Highlight Reset Lamp Timer and press ENTER. A warning message
displays asking if you want to reset the lamp timer. Highlight Reset
and press ENTER. The lamp time will be reset to "0".
Advanced Setup
Lamp Settings
HDMI Settings
ENTER
Baud Rate
Test Pattern
High Altitude Mode
115200
Off
Password
Key Lock
Reset All Settings
ISF
S-Video
EXIT Back
Lamp Settings
Normal
Lamp Power
ENTER
Reset Lamp Timer
Equivalent Lamp Hour
EXIT Back
WARNING
Reset Lamp Timer?
Reset
Cancel
Additional information
47