Download Synology USB Station 2

USB Station 2 User's Guide
Based on DSM 3.1
To connect to the Internet via PPPoE:
1 Click PPPoE Setting.
2 Enter the account information provided by your ISP.
3 Click OK.
Note: If you are still facing connection problems, contact your Internet Service Provider.
Tunnel
Tunnel is a technique that encapsulates IPv6 packets within IPv4 packets, allowing isolated IPv6 host or network
to be compatible with IPv4 network backbone.
Click the Tunnel tab to allow your USB Station 2 to gain Internet access via IPv6 under the IPv4 environment.
To setup IPv6 Tunnel:
1 Tick Enable tunnel.
2 In Server address, enter the hostname or the IP of the tunnel service provider.
3 Select if you want to Connect anonymously or Connect with an existing account. If you choose the latter,
please also enter User name and Password.
4 Click OK to save the settings.
Note:
 Your external IPv6 address may be automatically updated by the service provider. However, USB Station 2 will not
remove the old IPv6 address immediately.
 If you are still facing connection problems, contact your Internet Service Provider.
24
Chapter 3: Modify System Settings