Download CDA DV710SS

SETTING TIME OF DAY (fig. 5.2)
The programmer is provided with an
electronic clock with luminous figures
showing the hour and minutes.
The first time the oven is connected up
to the electricity supply and after a
power cut, three zeroes will flash on the
programmer display.
To adjust the time, the two buttons
(
) must be pressed simultaneously and then the button
( ) or
( ) until the correct time is set.
Setting speed automatically increases if
you keep the setting buttons pressed.
MANUAL OPERATION
To use the oven manually, i.e. without
the programmer, you must cancel the
flashing A by pressing the two buttons
(
) simultaneously (the letter
A will go out and the symbol
will
come on).
CANCELLING A PROGRAMME
If the letter A is not flashing (which
means that a cooking program has
already been set) by pressing the two
(
) simultaneously
buttons
you will cancel the program and switch
to manual.
If the oven is on, you must switch it
off manually.
Fig. 5.2
Fig. 5.3
21