Download Supermicro X7DAL-E+

Chapter 4: BIOS
Mode
This setting allows you to select the type of device to be connected to Serial
Port B. The options are Normal and IR (for an infrared device).
Base I/O Address
This setting allows you to select the base I/O address for Serial Port B. The
options are 3F8, 2F8, 3E8 and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for Serial Port B.
The options are IRQ3 and IRQ4.
Parallel Port
This setting allows you to decide how Parallel Port is controlled. The options are
Enabled (user defined), Disabled and Auto (BIOS-or OS- controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are 378, 278
and 3BC.
Interrupt
This setting allows you to select the IRQ (interrupt request) for the parallel port.
The options are IRQ5 and IRQ7.
Mode
This feature allows you to select Parallel Port mode settings. The options are
Output only, Bi-Directional, EPP and ECP.
DMA Channel
This item allows you to select the DMA channel for the Parallel Port. The options
are DMA1 and DMA3.
Floppy Disk Controller
This setting allows you to decide how the floppy disk drive is controlled. The options
are Enabled (user defined), Disabled, and Auto (BIOS and OS controlled).
Base I/O Address
This setting allows you to select the base I/O address for the floppy disk drive.
The options are Primary and Secondary.
4-15