Download SMC EliteConnect Wireless Bridge

Wireless Interface Commands
7
show interface wireless
This command displays the status for the wireless interface.
Syntax
show interface wireless <a | g> vap-id
• a - 802.11a radio interface.
• g - 802.11g radio interface.
• vap-id - The number that identifies the VAP interface. (Options: 0~3)
Command Mode
Exec
Example
SMC AP#show interface wireless g 0
Wireless Interface Information
=========================================================================
----------------Identification------------------------------------------Description
: Enterprise 802.11g Access Point
SSID
: VAP_TEST_11G 0
Channel
: 1 (AUTO)
Status
: ENABLED
MAC Address
: 00:03:7f:fe:03:02
----------------802.11 Parameters---------------------------------------Radio Mode
: b & g mixed mode
Protection Method
: CTS only
Transmit Power
: FULL (16 dBm)
Max Station Data Rate
: 54Mbps
Multicast Data Rate
: 5.5Mbps
Fragmentation Threshold
: 2346 bytes
RTS Threshold
: 2347 bytes
Beacon Interval
: 100 TUs
Authentication Timeout Interval : 60 Mins
Association Timeout Interval
: 30 Mins
DTIM Interval
: 1 beacon
Preamble Length
: LONG
Maximum Association
: 64 stations
MIC Mode
: Software
Super G
: Disabled
VLAN ID
: 1
----------------Security------------------------------------------------Closed System
: Disabled
Multicast cipher
: WEP
Unicast cipher
: TKIP and AES
WPA clients
: DISABLED
WPA Key Mgmt Mode
: PRE SHARED KEY
WPA PSK Key Type
: PASSPHRASE
WPA PSK Key
: EMPTY
PMKSA Lifetime
: 720 minutes
Encryption
: ENABLED
Default Transmit Key
: 1
Common Static Keys
: Key 1: EMPTY
Key 2: EMPTY
Key 3: EMPTY
Key 4: EMPTY
Pre-Authentication
: DISABLED
Authentication Type
: SHARED
7-113