Download Benq MP515
Transcript
Function (default setting/value) Projector Position Description 4. SYSTEM SETUP: Basic menu (Front Table) The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 14 for details. Menu Settings Menu Display Time (15 sec) Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments. Menu Position (Center) Sets the On-Screen Display (OSD) menu position. Auto Power Off (Disable) Blank Timer (Disable) Panel Key Lock (Off) Sleep Timer (Disable) Splash Screen (BenQ logo) 5. SYSTEM SETUP: Advanced menu Quick Cooling (On) High Altitude Mode (Off) Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off " on page 55 for details. Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 38 for details. Disables or enables all panel key functions except II Power on the projector and keys on the remote control. See "Locking control keys" on page 40 for details. Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours. Allows you to select which logo screen will display during projector start-up. The following options are available: BenQ logo, Black screen or Blue screen. Enables or disables the Quick Cooling function. Selecting On enables the function and projector cooling time will be shortened from a normal 90-second duration to approximately 30 seconds. A mode for operation in high altitude areas. See "Operating in a high altitude environment" on page 40 for details. Operation 51