Download Acronis Backup & Recovery 10 Server, Linux


"Band aid" database recovery solution: mount up an image that contains an SQL database from
a recently failed machine. This will give access to the database until the failed machine is
recovered.

Offline virus clean: if a machine is attacked, the administrator shuts it down, boots with bootable
media and creates an image. Then, the administrator mounts this image in read/write mode,
scans and cleans it with an antivirus program, and finally recovers the machine.

Error check: if recovery failed due to a disk error, mount the image in the read/write mode.
Then, check the mounted disk for errors with the chkdsk /r command.
To mount an image, perform the following steps.
Source
Archive (p. 135)
Specify the path to the archive location and select the archive containing disk backups.
Backup (p. 136)
Select the backup.
Access credentials (p. 136)
[Optional] Provide credentials for the archive location. To access this option, select the
Advanced view check box.
Mount settings
Volumes (p. 137)
Select volumes to mount and configure the mount settings for every volume: assign a letter
or enter the mount point, choose the read/write or read only access mode.
When you complete all the required steps, click OK to mount the volumes.
6.5.1
Archive selection
Selecting the archive
1. Enter the full path to the location in the Path field, or select the desired folder in the folders tree.

If the archive is stored in a centralized vault, expand the Centralized group and click the
vault.


If the archive is stored in a personal vault, expand the Personal group and click the vault.
If the archive is stored in a local folder on the machine, expand the Local folders group and
click the required folder.
If the archive is located on removable media, e.g. DVDs, first insert the last DVD and then insert the discs in
order starting from the first one when the program prompts.

If the archive is stored on a network share, expand the Network folders group, then select
the required networked machine and then click the shared folder. If the network share
requires access credentials, the program will ask for them.
Note for Linux users: To specify a Common Internet File System (CIFS) network share which is mounted on a
mount point such as /mnt/share, select this mount point instead of the network share itself.

If the archive is stored on an FTP or SFTP server, type the server name or address in the Path
field as follows:
ftp://ftp_server:port _number or sftp://sftp_server:port number
If the port number is not specified, port 21 is used for FTP and port 22 is used for SFTP.
Copyright © Acronis, Inc., 2000-2010
135