Download AS1010S-T - Supermicro

AS1010S-T User's Manual
Power LED/Speaker
PWR LED Connector
Pin Definitions (JD1)
On JD1, pins 1, 2, and 3 are for the
Pin#
Definition
power LED and pins 4 through 7 are
1
+Vcc
for the speaker. See the tables on the
right for pin definitions.
2
Control
3
Control
Speaker Connector
Pin Definitions (JD1)
Note: The speaker connector pins are
for use with an external speaker. If
you wish to use the onboard speaker,
you should close pins 6 and 7 with a
jumper.
ATX PS/2 Keyboard and
PS/2 Mouse Ports
Pin#
Definition
4
Red wire, Speaker data
5
No connection
6
Buzzer signal
7
Speaker data
PS/2 Keyboard and Mouse Port
Pin Definitions
(J1)
The ATX PS/2 keyboard and the PS/2
mouse ports are located beside the
USB ports. See the table on the right
for pin definitions.
Pin #
Definition
Pin #
Definition
1
Data
4
VCC
2
NC
5
Clock
3
Ground
6
NC
Wake-On-Ring
The Wake-On-Ring header is designated JWOR. This function allows
your computer to receive and "wakeup" by an incoming call to the modem
when in suspend state. See the table
on the right for pin definitions. You
must have a Wake-On-Ring card and
cable to use this feature.
Wake-On-Ring
Pin Definitions
(JWOR)
Pin#
Definition
1
Ground (Black)
2
Wake-up
Wake-On-LAN
The Wake-On-LAN header is designated JWOL. See the table on the
right for pin definitions. You must
have a LAN card with a Wake-On-LAN
connector and cable to use the WakeOn-LAN feature.
5-16
Wake-On-LAN
Pin Definitions
(JWOL)
Pin#
Definition
1
+5V Standby
2
Ground
3
Wake-up