Download Scali System Guide

D-2 scaconftool - command reference
?
: unknown/unknown
D-2.17 ConfTool> link
5. The link command disables or enables links.
Usage:
link <[disable | enable]>
<controller number> [<list>]
Example:
link disable 0 all
Disable controller 0 on all nodes.
D-2.18 ConfTool> update
The update command ask the configuration server for updated system information.
Usage:
update [ <list> | system]
Example:
update scali2-13 scali2-23
Ask for updated information on nodes scali2-13 and scali2-23.
Example:
update system
Ask for new information on whole system.This command is more or less
obsolete, as updated system information is received each time the server is
contacted, that is for nearly every command performed from scaconftool.
D-2.19 ConfTool> restart
The restart command does an on-line restart of the configuration server.
Usage:
restart
D-2.20 ConfTool> sciping
The sciping command pings nodes over SCI interconnect. It uses scash.
Usage:
sciping [<list>]
Example:
sciping node1 node2 node3
send sciping from the listed nodes to the listed nodes.
D-2.21 ConfTool> help
The help and ? command print a help message.
Usage:
help/? [<command>]
Example:
help/? restart
Scali System Guide Version 3.0
179