Download F# Trinitron

Using Basic Functions
Setting Up the TV
After you have finished connecting your TV, you can use Auto Program to set up your
channels. During Auto Program, the TV will automatically
search for available channels
program receivable channels.
and
when you StartAuto Programwait uniil itis finished; Otherwiseit WillSkipOverchannelsthat are
available.PerformAuto Programagain to program receivablechannels.
_ER
1
Press
2
Press _
_
to turn on the TV. The Initial Setup screen appears.
CH
CH
on the remote
control or on the TV front panel to start Auto Program,
or press
(_ to exit.
_J The Initial setup screenappeais eachtime you tUrn OntheTV until you perform Auto programl
To perform Auto Program again
1
Press _.
2
Press _ to highlight
Channel
3
Press _" to highlight
Cable. Press {_ to select.
4
Press _ or _" to highlight
select.
Menu.
On or Off according
5
Press _" to highlight
Auto Program.
6
After Auto Program
finishes, press _
to how you connected
your TV. Press _
to
Press {_ to search for channels.
to exit.
To reset the TV to factory settings
1
Turn the TV on.
2
Hold down
3
Press and release the POWER button
then back on.
4
Release
RESET
cD on the remote control.
on the TV front panel. The TV will turn itself off,
RESET
cD.
15