Download SERVICE MANUAL - Diagramasde.com

KD-27FS170/32FS170/36FS170
SECTION 1: DISASSEMBLY
1-1. REAR COVER REMOVAL
1 Remove screws from top of cover.
4 Screws SCREW +BVTP 4X16 TYPE2 TT (B)
1
2 Remove screws from sides of cover.
4 Screws SCREW +BVTP 4X16 TYPE2 TT (B) - 2 each side
3 Remove screws from bottom of cover.
2 Screws SCREW +BVTP 4X16 TYPE2 TT (B)
4 Remove screws from back of cover.
3 Screws SCREW +BVTP 3X12 TYPE2 TT (B)
5 Remove rear cover
2
5
3
1-2. CHASSIS ASSEMBLY REMOVAL
4
1 Release the M Board.
2 Release the A Board wires from Clip Holder.
3 Press on catch tab to release the A Board.
4 Remove Power Cable Holders by gently
rocking to release clips.
5 Gently pull the chassis forward.
VD Board
CV Board
4
Chassis Assembly
3
2
KD-27FS170/32FS170/36FS170
1
9