Download Operation Manual

2 If LATIN AMERICA is selected:
PAL&PAL-N area
L A T I N AMER I CA
PA L &PA L - N_ AREA
ARGEN T I NA
P ARAGUA Y
URUGUA Y
NTSC&PA L - M AREA
OTHER AREA
Selecting the Menu
Language
Argentina
Paraguay
Uruguay
NTSC&PAL-M area
Other area
You can select one of seven languages (English, French,
German, Spanish, Italian, Japanese, Chinese) for
displaying the menu and other on-screen displays.
“ENGLISH (English)” is selected in the default setting.
The current settings are displayed in place of the x
marks on the illustrations of the menu screen.
4 If ASIA EXCEPT JAPAN is selected:
Customers who will use this unit in the shaded
areas shown in the map below should select NTSC
AREA.
Other customers should select PAL AREA.
i
SDI
HDMI COMPOSITE
F1
F2
F3
F4
F5
F6
F7
ENTER RETURN MENU
ENTER RETURN MENU
3~5
AS I A EXCEPT
NTSC_ AREA
PAL
AREA
J APAN
1
Turn on the unit.
2
Press the MENU button.
PAL area
COLOR TEMP
H D M I F O R M AT
NTSC SETUP
SCAN MODE
P O W E R S AV I N G
I/P MODE
The SELECT SETTING screen disappears and the
menu item settings suitable for the selected area are
applied.
When you have selected the wrong area, set the
following items using the menu.
• COLOR TEMP (on page 19)
• NTSC SETUP (on page 20)
• COLOR SPACE (on page 19)
See “The default setting values for each area” (page 14)
on the setting value.
2 1
STATUS 1 / 2
Press the menu selection control or the ENTER
button.
Note
1
The menu appears.
The menu presently selected is shown in yellow.
NTSC area
F O R M AT
3
1
3
xxxxxxxxx
xxxxxxxx
xxx
xxxxx
x
xxxxxxxx
xx
xxxxxxx
Turn the menu selection control to select SYSTEM
SETTING of the USER CONFIG (user
configuration) menu, then press the menu selection
control or the ENTER button.
Selecting the Menu Language
15