Download SERVICE MANUAL

PCG-NV290
SERVICE MANUAL
For American Area
Canadian Model
Ver 1-2002J
Revision History
l
a
i
t
n
Lineup : PCG-NV290
S400
e
d
i
f
n
o
C
• Design and specifications are subject to
change without notice.
NOTEBOOK COMPUTER
9-876-001-01
Information in this document is subject to change without notice.
Caution Markings for Lithium/Ion Battery - The following or similar
texts shall be provided on battery pack of equipment or in both the
Sony, VAIO and CLIE are trademarks or registered trademarks of
Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf
operating and the service instructions.
and other Microsoft products are trademarks or registered trademarks
of Microsoft Corporation in the United States and other countries.
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by
The word Bluetooth and the Bluetooth logo are trademarks of
Bluetooth SIG, Inc. AMD, AMD logo, AMD Duron and
the manufacturer. Discard used batteries according to the
manufacturer’s instructions.
combinations thereof, 3DNow!, are trademarks of Advanced Micro
Devices, Inc. Intel Inside logo, Pentium and Celeron are trademarks
CAUTION: The battery pack used in this device may present a fire
or registered trademarks of Intel Corporation. Transmeta, the
Transmeta logo, Crusoe Processor, the Crusoe logo and
or chemical burn hazard if mistreated. Do not disassemble, heat
above 100°C (212°F) or incinerate.
combinations thereof are trademarks of Transmeta Corporation in
the USA and other countries. Graffiti, HotSync, PalmModem, and
Dispose of used battery promptly.
Keep away from children.
Palm OS are resistered trademarks, and the Hotsync logo and Palm
are trademarks of Palm, Inc. or its subsidiaries. (M) and Motrola
CAUTION: Changing the back up battery.
are trademarks of Motrora, Inc. Other Motrola products and services
with (R) mark like Dragomball are the trademarks of Motrola, Inc.
• Overcharging, short circuiting, reverse charging, multilation or
incineration of the cells must be avoided to prevent one or more of
All other names of systems, products and services in this manual
the following occurrences; release of toxic materials, release of
hydrogen and/or oxygen gas, rise in surface temperature.
are trademarks or registered trademarks of their respective owners.
In this manual, the (TM) or (R) mark are not specified.
• If a cell has leaked or vented, it should be replaced immediately
while avoiding to touch it without any protection.
Service and Inspection Precautions
1. Obey precautionary markings and instructions
4. Inspect after completing service
Labels and stamps on the cabinet, chassis, and components identify areas
requiring special precautions. Be sure to observe these precautions, as well
as all precautions listed in the operating manual and other associated
documents.
After servicing, inspect to make sure that all screws, components, and wiring
have been returned to their original condition. Also check the area around
the repair location to ensure that repair work has caused no damage, and
confirm safety.
2. Use designated parts only
5. When replacing chip components...
The set’s components possess important safety characteristics, such as
noncombustibility and the ability to tolerate large voltages. Be sure that
replacement parts possess the same safety characteristics as the originals.
Also remember that the 0 mark, which appears in circuit diagrams and
parts lists, denotes components that have particularly important safety
functions; be extra sure to use only the designated components.
Never reuse components. Also remember that the negative side of tantalum
capacitors is easily damaged by heat.
3. Always follow the original design when mounting
parts and routing wires
6. When handling flexible print boards...
• The temperature of the soldering-iron tip should be about 270C.
• Do not apply the tip more than three times to the same pattern.
• Handle patterns with care; never apply force.
The original layout includes various safety features, such as inclusion of
insulating materials (tubes and tape) and the mounting of parts above the
printer board. In addition, internal wiring has been routed and clamped so
as to keep it away from hot or high-voltage parts. When mounting parts or
routing wires, therefore, be sure to duplicate the original layout.
Caution: Remember that hard disk drives are easily damaged by
vibration. Always handle with care.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
Confidential
—2—
PCG-NV290 (AM)
TABLE OF CONTENTS
Section
Title
Page
CHAPTER 1. BLOCK DIAGRAM ............................... 1-1
(to 1-2)
CHAPTER 2. FRAME HARNESS DIAGRAM ........ 2-1
(to 2-2)
CHAPTER 3. EXPLODED VIEWS AND
PARTS LIST ............................................ 3-1
3-1. Main Section .................................................................... 3-3
3-2. LCD Section (NV290 Model) – Made by SH –
(Only CTO) – Made by TS – ..................... 3-7
3-3. Connector Section (CH Type Only) ................................. 3-9
(to 3-10)
CHAPTER 4. OTHERS
4-1. Replacing the CPU .......................................................... 4-1
1. Removing the CPU .......................................................... 4-1
2. Installing the CPU ............................................................ 4-1
History of the changes is shown as the
“Revision History” at the end of this data.
Confidential
—3—
PCG-NV290 (AM)
CHAPTER 1.
BLOCK DIAGRAM
CPU Local Bus
Pentium 4
Processor
512KB L2
Memory
CONTROLLER
HUB
RG82845MZ
593 FCBGA
PCG-NV Series BLOCK DIAGRAM Rev. 0.2
200MHz Memory Bus
(DDR)
CLKGEN
IMI
9870GTD
SMBUS2
DDR(SO-DIMM)
SMBUS2
JUN/10/2002
By T.Shibata
LCD
UXGA TFT
SXGA+ TFT
XGA TFT
SONY
Refer to Clock Generator
LCD CONN
Block Diagram
Graphics
EEPROM
EEPROM
For LAN
Cable
VGA
Out
Dsub-15p
M7
csp32
(ATI)
For Password
SMBUS2
PCI BUS(3.3V)
Line-Out
AV
Out
IDE(ATA100)
i.LINK
Primary
Secondary
i.LINK0
CardBus/16bitCard
Internal
HDD
Optical
Drive
CARDBUS
i.LINK
RICOH
RC5C522
EEPROM
For i.Link
USB0
CONN
USB2
CONN
USB3
CONN
Port-1
IO Control Hub
ICH3-m
FW82801CAM
Port-2
Memory
Stick
Module
MS
CONN
i.LINK0
Port-0
PC Card
Connector
2 Slot
Serial
Parallel
Serial
Dsub-9p
Parallel
Dsub-25p
LPC
Port-4
AC LINK
SMBUS1
Super I/O
SMsC
Port-5
Reserved
Ether
PHY
RJ45
MDC
(Modem
Daughter
Card)
Module
RJ-11
RJ11
LPC47N227
Audio
YMF753
(Yamaha)
7 8
10Key
*
B
9
-
4
5
6
+
1
2
3
0
.
USB
or
E
JOG
Controller
I/O Expander
& SM BUS MUX
Other
Control
AMP, etc.
RJ-11
LID
KeyBoard
Membrane
LINE-OUT
TouchPad
JOG
Power
MD in
or
Line-in
MD Audio Out
MD in
Bay CN
Woofer
ATF1
FDD
Parallel
FWH
8Mb
(Flash BIOS
ROM)
ATF0
FAN1
MultiPurpose Bay
/
SMBUS0
FAN0
Serial
N
H8S/2140B
KBC/EC
SPIC
FDD
Battery
Power
Circuit
DC Jack
FDD
Phone
Out
ExtMic
in
Speaker
L&R
Confidential
1-1
1-2
(END)
PCG-NV290 (AM)
CHAPTER 2.
FRAME HARNESS DIAGRAM
MONTOR
SERIAL
PRINTER
USB
LCD Block
Rear Panel
CN1801
1
DC FAN
1
CN1501
NETWORK
26
2
CN5011
1
CN5012
CN6001
CN6002
14 1
B21
A21
49
50
B1
2
C3101
1
24
18
2
2
1
CN3102
CN8002
40
40
CN8001
2
1
18
1
2
2
CN3103
DDR266 SO-DIMM
SLOT A
NICKEL HYDROGEN
BATTERY
40
HARD DISK
OPTICAL
DEVICES
RAM
39
17
2
PWS-18 Board
(Side-A)
FLOPPY
DISK
DRIVE
1
CN1181
1
(W-LAN Model)
CARD, WIRELESS LAN
1
77
154
CARD, MODEM
200
CN1901
30
CN501
CN502
CN1201
PC CARD
CONNECTOR
29
200
199
199
1
78
1
CN111
CN2351
CN2301 A1
2
25
1
2
30
2
29
2
1
1
SWX-93 Board
(Side-A)
Woofer
Net-MD
Ten-Key
39
2 CN852 40
CN5501
1
2
2
25
DDR266 SO-DIMM
SLOT B
KEY BOARD
1
J1
1
2
CN1601
CON2
1
1
26
DC FAN
CN1301
2
29
2
2
CN121
CNX-163 Board
(Side-A)
RAM
CN5502
IEEE 1394 i.LINK
2
CN5001
CN3004
MBX-66 Board
(Side-A)
CNX-167 Board
(Side-A)
28
25
1 4
CN888
CN1171
13
14
CN851
1
2
L Side
CN2001
CN5051
CN5021
(W-LAN Model)
INVERTER
CN5031
CN5041
ANTENNA
LCD HARNESS
PHONE
DC-IN
ANTENNA
LCD
39
39
1
CN4201
12
1
BATTERY PACK
1
CN1651
123
CN8402
2
44
43
124
8
CN2201
2
1
1
J1
1
PAD, TOUCH
EXTERNAL
MICROPHONE
CN8501
HEADPHONE
CN4231
CN4011
12
1
CN4031
40
1
CN7003
Front Face
1
10
CN4021
1
12
9
6
1
2
ENCODER, JOG
CN7001
10
1
IFX-195 Board
(Side-A)
CN7002
CN4001
From board to connector (direct connection)
Harness (connector at both end)
Harness (soldered at one end)
Connectors soldered on board and appearing on the panel
SWX-94 Board
(Side-A)
MEMORY STICK
Confidential
2-1
2-2
(END)
PCG-NV290 (AM)
CHAPTER 3.
EXPLODED VIEWS AND PARTS LIST
NOTE:
• Items marked “ * ” are not stocked since they are seldom
required for routine service. Some delay should be
anticipated when ordering these items.
• The mechanical parts with no reference number in the
exploded views are not supplied.
• When two or more parts are shown in parallel, use the
part described first as the main part.
• The parts marked “ $ ” are the High Value Modules.
• The parts marked “ # ” are the parts on which
barcode label is attached.
• The indication [CH] is used for identification of part type.
• Regarding the boards of this model, the discrete parts
on the boards cannot be replaced. However, Some
connectors can be replaced.
The components identified by mark 0 or
dotted line with mark 0 are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
Confidential
3-1
3-2
PCG-NV290 (AM)
3-1. Main Section
Ref.No.
1
2
3
4
5
Part No.
X-4624-632-3
4-662-679-01
X-4624-633-2
4-661-307-01
4-662-680-01
Description
ASSY MEMORY COVER
INSULATOR MEMORY COVER
ASSY MINI PCI COVER
FOOT FRONT
INSULATOR MINI PCI
6
7
8
9
* 10
4-661-671-02
4-661-164-11
4-661-113-02
4-664-566-01
4-653-799-02
INSULATOR BOTTOM
MODEM COVER
HDD DOOR
CUSHION HDD BRACKET F
BRACKET HDD
11
12
4-653-801-02
A-8059-136-A $ #
12
12
A-8111-359-A $ #
A-8059-226-A $ #
13
X-4624-638-2
SHEET HDD
(MV290)...
ASSY HDD 40GB (H,20) (S)
(CTO)...ASSY HDD 60GB (H,30) (S)
(CTO)...
HDD (30GB, IC25N030ATCS04-0) (S)
ASSY FOOT REAR
14
15
16
* 17
18
X-4624-634-2
4-662-543-01
4-663-865-02
X-4624-741-1
1-763-843-11
ASSY SIDE I/O DOOR
LABEL SIDE I/O
CUSHION SIDE I/O
ASSY 2ND FAN GUIDE
FAN, DC (SECOND)
19
20
21
* 22
23
4-662-704-01
4-662-542-01
4-661-116-02
4-661-111-01
X-4624-631-2
SHEET 2ND FAN
LABEL I/O
I/O DOOR
SUPPORT BRACKET
ASSY BOTTOM HOUSING
24
25
26
27
28
4-662-375-01
4-661-112-01
4-661-115-02
4-664-311-01
1-756-038-11
FOOT CENTER
BATT DOOR LINK
BATT DOOR
BATT CUSHION
BATTERY, NICKEL HYDROGEN
29
30
31
32
33
4-664-565-01
A-8059-969-A
X-4624-627-2
1-816-578-11
1-824-587-21
CUSHION BOTTOM C
ASSY BAY FD (TE)
ASSY FDD BOTTOM
CONNECTOR, BAY 26P 1MM
FFC (26P)
34
36
37
* 38
39
4-661-092-01
1-796-231-21 $ #
4-661-087-02
4-661-091-11
1-796-506-11
FDD TOP BRACKET
FDD (FD-05HG-7771)
(CTO)...GROUND PLATE C(PA)
BRACKET C
(NV290)...W-DVD (SD-R6012)
39
40
40
41
42
1-796-455-11 $ #
X-4625-258-1
X-4624-626-1
1-961-764-11
1-761-564-11
(CTO)...COMBO DRIVE (UJDA730)
(NV290)...ASSY DVD-RW BEZEL (TO)
(CTO)...ASSY CD-ROM BEZEL
HARNESS (DC)
(NV290/CTO W-LAN)...
WIRELESS LAN CARD
4-664-567-01
4-661-110-02
4-661-673-01
4-661-167-01
4-661-672-02
CUSHION HDD GUIDE
HDD GUIDE
INSULATOR PC-CARD
HDD SUPPORT GROUNDING
INSULATOR HDD
48
49
50
51
52
A-8067-695-A $ #
A-8110-584-A $
X-4624-725-1
4-661-163-01
4-662-544-01
[CH]...ASSY MBX-66.2 (C) (S)
[CH]...ASSY CNX-167 (C) (S)
SIDE I/O BRACKET ASSY
LAN DOOR
SHEET SIDE I/O
53
54
55
56
57
1-816-371-11
4-661-151-01
4-663-030-01
4-662-684-01
6-703-333-01
CONNECTOR, PC CARD(EJECT,RIGHT)
HEAT SINK
INSULATOR FIN
THREMAL SHEET NORTH
(NV290)...IC RH80532GC041512-2
(Pentium 4-M 2.0GHz)
43
44
45
* 46
47
Ref.No. Part No.
57
6-703-330-01
57
6-703-331-01
58
59
60
X-4624-710-2
4-660-835-01
1-824-072-21
Description
(CTO)...IC RH80532GC029512-2
(Pentium 4-M 1.7GHz)
(CTO)...IC RH80532GC033512-2
(Pentium 4-M 1.8GHz)
I/O BRACKET ASSY
THERMAL SHEET CPU
CABLE, FLEXIBLE FLAT (26PIN)
4-654-119-11
4-662-685-01
4-661-674-02
A-8067-697-A $
4-662-537-01
PLATE (DC)
THERMAL SHEET PW
INSULATOR PWS
[CH]...ASSY PWS-18.2 (C) (S)
BLIND FDD
67
68
69
1-823-101-11
X-4624-635-1
6-600-116-01
69
6-600-160-01
70
1-960-827-61
CABLE, FLEXIBLE FLAT
ASSY LATCH DETECTOR
IC M470L3224DT0-CB0
(DDR266 SO-DIMM 256MB)
IC HYMD232M646A6-H
(DDR266 SO-DIMM 256MB)
HARNESS (2 PIN)
71
72
73
* 74
75
1-761-380-23
1-763-842-11
4-664-521-01
X-4624-727-1
4-664-050-01
CARD, MODEM
FAN, DC (CPU)
SHEET FF
PALMREST BRACKET L ASSY
SHEET SUPPORT SCREW
76
77
78
79
80
1-477-230-12 $ #
1-825-142-11
X-4624-637-2
1-824-072-31
A-8110-586-A $
KEY BOARD UNIT (U)
1-BOX STEREO SPEAKER
ASSY HOOD KEYBOARD
CABLE, FLEXIBLE FLAT (14PIN)
[CH]...ASSY SWX-93 (C) (S)
81
81
82
83
84
4-661-171-12
4-662-547-12
4-661-172-02
1-796-319-21
1-400-255-11
(NV290/CTO W-LAN)...W-LAN SWITCH
(CTO)...W-LAN SWITCH COVER
TP BEZEL
PAD, TOUCH
(NV290/CTO W-LAN)...FERRITE CORE
85
* 86
* 87
88
89
X-4624-636-2
4-662-681-01
X-4624-728-2
4-662-686-01
4-663-780-01
ASSY PALMREST HOUSING
HEAT SINK PW
PALMREST BRACKET R ASSY
THERMAL SHEET HS-PW
(NV290/CTO W-LAN)...
PALMREST BRACKET R TAPE
* 90
91
93
94
97
4-661-120-01
1-823-813-11
A-8110-587-A $
1-824-072-51
1-824-072-11
TOUCHPAD BRACKET
CABLE, FLEXIBLE FLAT 12P
[CH]...ASSY SWX-94 (C) (S)
CABLE, FLEXIBLE FLAT (10PIN)
CABLE, FLEXIBLE FLAT (40PIN)
98
99
99
103
104
A-8067-693-A $
4-661-551-22
4-661-551-32
4-665-113-01
4-665-226-01
ASSY IFX-195 (S)
(NV290/CTO W-LAN)...LENS COVER
(CTO)...LENS COVER
SHEET TP-BRACKET BT
SPACER TPB
105
106
108
109
110
4-665-227-02
4-665-228-01
4-665-016-01
4-665-017-01
4-665-018-01
SPACER
SPACER
COPPER
COPPER
COPPER
111
112
113
114
115
4-665-022-01
4-665-023-01
X-4625-033-1
4-656-131-01
4-641-630-21
CUSHION HDD GUIDE TOP
CUSHION BOTTOM B
ASSY FINGER HDD
SHEET MODEM
COVER BAY HOLE
124
125
126
127
131
4-661-173-02
4-661-088-01
4-661-090-01
4-661-093-02
4-661-125-01
JOG
FDD
FDD
FDD
BAY
* 61
63
64
65
66
3-3
Ref.No.
132
133
134
135
136
Part No.
Description
1-816-577-11
CONNECTOR, BAY 4P 1MM
1-824-587-11
FFC (4P)
1-477-344-11
KEY UNIT, 10
4-661-127-02
BAY K BOTTOM
4-661-128-01
BAY K FOOT
137
138
139
141
142
4-661-129-01
4-661-134-01
4-662-551-01
4-662-379-01
4-662-378-01
BAY
BAY
BAY
FIN
USB
143
144
* 145
146
147
1-477-588-11
4-666-529-01
4-666-528-01
4-666-530-01
4-667-146-01
148
149
150
4-657-284-01
4-657-045-02
4-655-927-01
Ref.No.
B1
B2
B3
B4
B5
K SPRING
K BEZEL
K COVER
GND
GND
Part No.
Description
4-665-205-01
SPECIAL FLAT HEAD (EG GRIP), M2
4-635-966-01
SCREW (HEX)
4-641-726-12
SCREW (M2), SPECIAL HEAD
4-661-107-01
STAND OFF M2X5
4-644-637-42
GRIP, M2 EG
B6
B7
B8
B9
B10
4-642-852-21
4-662-693-03
4-644-637-32
4-646-807-11
4-635-301-01
+B M2
GRIP, M2.6 S HEAD (EG)
GRIP, M2 EG
0 PLATE M2.5 (FDD)
SCREW M3X4
ENCODER, JOG
ADHESIVE TAPE ATI
HEAT SINK ATI
CUSHION ATI
THERMAL SHEET PW-2
B11
B12
B13
B14
B15
4-654-811-01
4-652-498-01
4-645-177-01
4-661-159-01
7-622-205-05
SCREW M3
+B M2 (NOJI)
(CTO)...SCREW (M1.7X3.5)
STAND OFF M2X8.5
NUT M2 TYPE2
ADHESIVE TAPE (PALM)
(NV290)...SPRING DRIVE (TO)
(NV290)...SPRING (DVD-ROM)
B16
B18
B19
B20
B21
4-641-726-41
4-665-648-01
4-666-474-01
4-639-112-01
4-644-637-71
SCREW (M2), SPECIAL HEAD
SCREW M2 EG GRIP WASHER
NUMBER 0 SPECIAL HEAD M2.6
SCREW M2X4
GRIP, M2 EG
TBR
PRH
TAPE BOTTOM A
TAPE BOTTOM B
TAPE BOTTOM C
BEZEL
LATCH
LATCH
LATCH
K TOP
LEVER
SPRING
BUTTON
BRACKET
Confidential
3-4
PCG-NV290 (AM)
B3
B6
54
52
K
58
B4
59
57
56
F
B15
49
B1
79
60
A
B3
L
O
J
147
74
73
B4
111
B16
B6
99
106
B3
N
144
B8
I
B21
B3
66
B
B15
67
88
68
G
71
97
72
70
L
B
A
98
20
17
13
S
B3
11
B10
P
B3
10
12
(NV290/CTO W-LAN Model)(∗1)
103
105
(CTO Model)
B3
15
19
108
22
B3
B12
H
16
38
B12
109
B10
6
93
S
14
9
B1
B3
21
18
41
B3
D (NV290/CTO
W-LAN Model) (∗1)
91
87
R
143
94
42
89
R
B18
B6
104
90
B1
75
B16
43
86
N
65
69
43 44
O
64
145
146
46
Supplied
with 85
124
63
47
85
C
148
B3
I
E
Supplied
with 48
B8
F 148
B1
142
G
B14
84
M
Q
H
69
P
B6
M
B3
J
D
80
141
B3
B7
B3
B2
114
(CTO
Model)
83
K
61
B2
B7
76
B3
45
81
77
48
C
50
(NV290/CTO W-LAN Model)(∗1)
82
51
55
B6
B7
78
53
39
B13
34
B11
113
8
Supplied
with 30
37
23
B7
B13
B3
B20
137
B20
4
115
24
2
150
31
149
25
E
135
B9
B5
B3
B3
39
32
B3
B3
4
B19
∗1 These components are related to the
WIRELESS LAN.
B5
3
5
126
127
28
136
B12
B12
29
138
B19
B3
1
13
B9
B12
27
134 R
(NV290 Model)
38
112
110
Supplied
with 3
131
S
B5
40
B12
33
36
125
7
133
R
Q
B3
139
132
Supplied
with 23
B3
26
40
30
S
Confidential
3-5
3-6
PCG-NV290 (AM)
3-2. LCD Section (NV290 Model) – Made by SH –
(Only CTO) – Made by TS –
312
313
311
B17
B17
321
310
B1
Supplied
with 310
B3
322
309
314
315
Ref.No.
301
302
303
304
305
Part No.
X-4624-630-4
X-4624-798-2
1-476-316-31
X-4624-799-1
1-961-756-12
Description
ASSY DISPLAY HOUSING
HINGE 15R
INVERTER UNIT
HINGE 15L
LCD HARNESS
306
307
* 309
310
311
4-664-943-02
4-664-944-01
4-664-977-01
X-4624-629-4
4-661-297-01
COPPER TAPE LCD CON
COPPER TAPE LCD ED
LCD-15 BRACKET L2
ASSY LCD BEZEL 15
CUSHION HINGE
312
313
314
314
* 315
4-661-135-01
4-661-296-03
A-8110-581-A $ #
A-8110-284-A $ #
4-664-978-02
HINGE COVER
CUSION LCD
(NV290)...ASSY LCD15SX (SH4) (S)
(CTO)...ASSY LCD 15TO AP (S)
LCD-15 BRACKET R2
316
317
318
319
320
4-661-101-01
4-661-548-01
4-661-157-02
4-661-158-01
1-754-242-11
LCD SHIELDING
LCD HOOK KNOB
LCD HOOK
LATCH SPRING
(NV290/CTO W-LAN)...
ANTENNA (1/2 LAMBDA) (∗1)
321
322
322
322
4-661-298-03
4-666-526-11
4-666-815-11
4-666-815-21
CUSHION LATCH
LABEL ID (U)
(CTO_XPH)...LABEL ID (U/CTO)
(CTO_XPP)...LABEL ID (U/CTO)
B1
B3
B17
B18
4-665-205-01
4-641-726-12
4-641-726-41
4-665-648-01
SPECIAL FLAT HEAD (EG GRIP), M2
SCREW (M2), SPECIAL HEAD
SCREW (M2), SPECIAL HEAD
SCREW M2 EG GRIP WASHER
Ref.No. Part No.
Description
ACCESSORIES
************
0801
802
0803
804
805
1-477-205-42 $
A-8110-809-A $ #
1-757-562-21
A-8110-962-A
A-8059-753-A
ADAPTOR, AC
BP2NX SNT (U) ASSY (S)
CORD, POWER
WEIGHT SAVER ASSY H2
ASSY BAY WOOFER
4-668-169-01
QUICK START, 2330U
801
804
AC Adaptor (1)
Weight Saver (1)
805
Woofer Bay Unit (1)
802
Battery Pack (1)
803
A
Power Cord (1)
B3
∗1 These components are related to the WIRELESS LAN.
Installation positions of the antenna and connectors are
specified depending on the colors of the lead wires.
B3
306
B1
305
B
NOTE :
Set the DIP switch on the MBX-66 board (Main board)
to match with the LCD that is used in this computer.
307
The components identified by
mark 0 or dotted line with mark
0 are critical for safety.
Replace only with part number
specified.
317
B18
318
304
320
Les composants identifiés par
une marque 0 sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
1
2
3
4
5
6
7
8
319
1
2
3
4
5
6
7
8
320
O
N
316
(NV290/CTO
W-LAN Model) (∗1)
A-8110-284-A
O
N
A-8110-581-A
The upper position where ON indication is shown is the
ON position . The lower position is the OFF position.
A-8110-581-A
No.
(NV290/CTO
W-LAN Model) (∗1)
B
ON/OFF
1 2 3 4 5 6 7 8
0 0 1 1 1 1 1 1
0 : ON
1: OFF
A-8110-284-A
No.
1 2 3 4 5 6 7 8
303
ON/OFF
A
0 1 1 1 1 1 1 1
0 : ON
B18
1: OFF
Supplied
with 301
302
301
Confidential
3-7
3-8
PCG-NV290 (AM)
3-3. Connector Section (CH Type only)
Ref.No.
901
Fig.
Part No.
Description
1-815-422-12 [CH]...CONNECTOR, USB
(A)
USB connector
902
1-779-745-21 [CH]...JACK, DC
DC IN connector
903
1-816-371-11 [CH]...CONNECTOR, PC CARD (EJEC,RIGHT)
PC Cord Slot connector
903
901
∗ Among the parts that are used on the boards of this model, only the connectors
that are show in the list can be replaced.
(The parts other that the specified connectors cannot be replaced.)
902
902
901
903
902
901
Confidential
3-9
3-10
(END)
PCG-NV290 (AM)
CHAPTER 4.
OTHERS
4-1. Replacing the CPU
1. Removing the CPU
1 Insert a flat-blade screwdriver into the notch as shown in the illustration
and rotate it so that the protrusion comes to the lock release position.
2 Pull the CPU gently upward to lift it out of the CPU socket.
1
1
CPU
Lock position
2
CPU socket
Lock release position
2. Installing the CPU
1 Align the triangle reference mark of the CPU with that of the CPU socket
and insert all the pins of the CPU to the corresponding holes of the CPU
socket.
2 Insert a flat-blade screwdriver into the notch as shown in the illustration
and rotate it so that the protrusion comes to the lock position.
2
2
CPU
Lock release position
1
Reference
marks
CPU socket
Lock position
NOTE:
Rotate a flat-blade screwdriver to the lock position securely. If not, the operation of the CPU may become unstable.
Confidential
4-1
(END)
PCG-NV290 (AM)
PCG-NV290 (AM)
List of PCG-NV Series (As of October, 2002)
Model Name
Service Manual
Part No.
PCG-NV170P
PCG-NV170
PCG-NV190
9-874-535-03
PCG-NV190P
PCG-NV290
9-876-001-01
: Additional Models
This manual and the constituent data may not be
replicated, copied nor reprinted in whole or in part
without prior written authorization of Sony Corporation.
9-876-001-01
Sony Corporation
— 22 —
English
2002J1600-1
© 2002 Sony Corporation
Published by Sony EMCS VAIO-GSC [SNT]
Revision History
Suffix
Ver.
Date
-01
Ver. 1
2002.10.15
Contents
QM No.
First
Edition
< Remarks >
[Confidential]
PCG-NV290 (AM)