Download INSTALLATION GUIDE - Type S & T Dashboard Mechanical Drive

WWW.OCTOPUSDRIVES.COM
WWW.OCTOPUSEUROPE.COM
B3
Type S Straight Shaft Drive
B3a Mounting Kits
There are two dashboard mounting options compatible with the Octopus Type S
drive system:
• 90º Bezel Kit OC15SUK10: This kit
should be used if the steering wheel is
mounted 90º to the dashboard (Fig B6).
Fig B6 - 90º mounting
• 20º Bezel Kit OC15SUK09: This kit
should be used if the steering wheel is
mounted 20º to the dashboard (Fig B7).
Fig B7 - 20º mounting
Spacer kits are also available to reduce the space required behind the dashboard if
required. See section B3c for further details.
Subject to change without notice
9 of 28
OC15270 REV D