Download AVL02 User Guide V1.5

AVL02 User Guide V1.5
Automatic Vehicle Location
Catalog
1
Product Overview ........................................................................................................ 3
1.1 Key Features........................................................................................................ 3
1.2 Specification......................................................................................................... 4
1.3 Outside feature .................................................................................................... 5
1.3.1 Socket and Switch ..................................................................................... 5
1.3.2 I/O ports ..................................................................................................... 6
1.3.3 LED Indicators ........................................................................................... 7
1.3.4 Detect Car ON/OFF ................................................................................... 8
1.3.5 Connect Relay to control the Car Oil/Power (Pin2) .................................... 9
2. How to use the Product ............................................................................................ 10
2.1 prophase to prepare ........................................................................................ 10
2.2
Use the command to set device by SMS....................................................... 12
2.2.1
Use the GPRS function ...................................................................... 12
2.2.2
Set the sleep mode............................................................................. 14
2.2.3
Set the parking alarm function ............................................................ 15
2.2.4
Set the interval SMS........................................................................... 16
2.2.5
Other useful commands ..................................................................... 16
3 The format of the GPRS............................................................................................... 17
4. SMS instruction list...................................................................................................... 20
5. Update the firmware of the AVL................................................................................... 25
6 Worldwide APN (Access Point Name) List ................................................................... 31
1
Product Overview
AVL02 is a GPS/GSM/GPRS tracking device which is specially
developed and designed for vehicle real-time tracking and security. With
superior GPS and GPRS modules, AVL02 has good sensitivity and stable
performance. It can get accurate GPS fix even in remote places.
1.1 Key Features
z
Internal Polymer Lithium Ion Battery in the AVL
z
Support mini USB port to update firmware
z
Tracking by time interavl via GPRS or SMS
z
Over-speed alarm
z
Geo-fence alarm
z
Low power alarm
z
Support single location and continual tracking
z
Can Real-time tracking your vehicle via map on PC
z
GPRS function, receiving position data and alarm data on Server
z
Anti-theft alarm, support alarm when someone tremble your car once
you
park it and send an alarm report to you via SMS or GPRS
data
z
Remotely check the status of the windows or doors close/open, through the 2
switch I/O sockets, and remotely control the status of ignition through the 1
digital I/O socket
z
SOS button send out exact location for immediate rescue. After user
press SOS button in the AVL, AVL unit will send out the location and
SOS alarm to the preset number via SMS or a server via GPRS
z
With 4M memory, which can store about 2000 PCS data. When GPRS
is lose connection, those data will be store and send when GPRS
connection is recover.
1.2 Specification
Feature
Characteristics
Dimension
108mm*58mm*28mm
N.W
140g
Exterior Power Supply
DC 12V – 24V
Inner lithium battery
DC 3.7V
Standby time
About 72 hours
Work
About 12 hours
time
Exterior GSM antenna
Receive GSM signal better
Exterior GPS antenna
Receive GPS signal better
Operating Temperature Range
-20℃ to +60℃
Air pressure
860Kpa –1060Kpa
Humidity
Up to 75% non-codensing
Position accuracy
10 –15 meters
GSM chip
support 3 frequency GSM 900/1800 /1900MHZ
GPS chip
Sirf-Star III (super-sensitivity and high accuracy )
Hot start
1 sec, average
Warm start
38 sec, average
Cold start
42 sec, average
Tremble Intensity
LED
3 LEDs indicates GSM signal, GPS signal, power on
and GSM module.
Button(not in the basic version)
1 buttons, report location
I/O Port
1 switch input, 2 digital input , 1 digital output,
1 analog input
1.3 Outside feature
1.3.1 Socket and Switch
Hardware
Function
A. Switch
Turn on /off the unit
B. USB Port
Support "USB Converter” to update firmware
C. I/O Sockets
Expanding function, as below
D. Power indicator light
When the unit charging, the light is blinking
E. GPS Antenna socket
Connect Exterior GPS Antenna
F. GSM Antenna socket
Connect Exterior GSM Antenna
G. SIM Card Holder
Hold a SIM card
H. Three LED
GSM LED(Right), Power& tremble Led, GPS Led
J. Yellow plastic Pin
Press it to pop up the SIM Card Holder
1.3.2 I/O ports
8)+12V
7)Digital Input 2
6)Digital Input 1
5)Analog Input
4)GND
3)SOS Button
(With GND)
2)Digital Output
1)Reserve
The function is as below:
NO.
Function
I/O 01
Reserve
I/O 02
Connect to Relay to control the Cut Current function
I/O 03
When SOS Button cable is connected to GND(port 04), namely trigger, the
unit will send out a data via SMS or GPRS, alarm type is “01”
I/O 04
GND, the voltage is ‘0’, The cathode of power input socket
I/O 05
AD input, Gather to the digital of voltage
I/O 06
When this cable triggered by high voltage, Device will send a GPRS alarm
data to Server. And when connect is lose , Device also will send a GPRS
alarm data to server. The alarm type is”52”,”53”. Use to Detect Car Switch
Status
I/O 07
The function is the same as I/O 6, but the alarm type is “50”, “51”. Use to
Detect Car Door Status.
I/O 08
The anode of power input socket(+12V)
Note: The port that no mark is leaving to customize.
1.3.3 LED Indicators
LED
State
Description
GPS Indicator
(Blue LED)
light 0.1s dark 2.9s
GPS Signal Well
light 1s dark 2s
No GPS Signal
light 0.5s dark 0.5s
GPS Fault
light 0.1s dark 0.1s
System Initial
light 1s dark 2s
Low Power
light 0.1s dark 2.9s
Power Good
always light
On Tremble
light 0.1s dark 0.1s
System Initial
light 0.1s dark 2.9s
GSM Signal Well
light 1s dark 2s
No GSM Signal
always dark
No SIM Card Or Bad SIM Card
light 0.1s dark 0.1s (flash three
times)
Call Ring
always light
In A Call
light 0.1s dark 0.3s (flash five
times)
Send A SMS
light 0.1s dark 0.3s (flash five
times)
Receive A SMS
light 0.1s dark 1s
Connect to GPRS
Tremble
Indicator
( Red LED)
GSM Indicator
(Green LED)
When AVL is in work mode, if GSM signal is in good state, the green led
will flash, similarly, if GPS signal is in good state, the blue led will flash, if
the green led is not flashing, that indicates the GSM signal is not good, if
the blue led is not flashing, then you should check if there is something
upon the GPS antenna top. Further, if you find the three leds are dark,
maybe the AVL entered into "sleep-mode" or there is no power in the AVL
unit.
1.3.4 Detect Car ON/OFF
1.3.5 Connect Relay to control the Car Oil/Power (Pin2)
2.
2.1
How to use the Product
prophase to prepare
Step1: Inset a SIM card.
make sure the SIM card can communicate with other cards via SMS
and call, and before installing the SIM card to the holder, please use a
mobile phone to empty the SMS storage of the card
Step2: Connect GSM Antenna and GPS Antenna to AVL unit.
(GPS
antenna)
( GSM
antenna)
When you connect to the GSM and GPS antenna,pls make sure that it is
until the connection is very firm.
Step 3: Fix the AVL connect the to the exterior power by 12V.
Pls refer to the introduce about I/O ports,port7 and port 8 apart connect
to the exterior power of anode and cathode.
Step 4: Turn on the AVL, observe the three leds in the AVL.
Turn on the AVL, you will see the three leds flash at the same time.
It entered into initial mode.
After about 1 mins ,the device will work normal,then you could
look the leds of status and refer to the introduce about 1.3.3 led
indicators.
When AVL is in work mode, if GSM signal is in good state, the
green led will flash, similarly, if GPS signal is in good state, the blue led
will flash, if the green led is not flashing, that indicates the GSM signal is
not good, if the blue led is not flashing, then you should check if there is
something upon the GPS antenna top. Further, if you find the three leds
are dark, maybe the AVL entered into "sleep-mode" or there is no power
in the AVL unit.
Notes: As everyone knows,the GPS signal is very weakly or have no
GPS signal in the office .So pls put the AVL02 to the open air in order to
receive the great GPS signal.
2.2
Use the command to set device by SMS
Notes: $$$$$$ is the password,and the default is:000000
If you want to modify the passwod:
The command of format:
*$$$$$$,001,@@@@@@#
Explication: $$$$$$: the old password
@@@@@@: the new password
For example:
*000000,001,123456#
Afeter you send the command of SMS to device,it will reply
to your mobile phone: Receive:’001’OK
*000000,001,123456#
2.2.1 Use the GPRS function
Notes: At first of all,make sure the SIM card insert to the device and
have the GPRS function.
Step1: Set the APN(Access Point Name )
Different network of provider have the different APN at every
country,if you don't know,pls refer to the attachment.
Format: *$$$$$$,011,APN,Username,Password#
Notes: The username and password could to be null1.
For example: *000000,011,cmnet,,#
Explication: The China Mobile’s APN is “cmnet”,and the username and
password are empty.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’011’OK
*000000,011,cmnet,,#
Step2: Set the server’s IP & PORT
Format : *$$$$$$,015,0,IP,PORT#
For example: *000000,015,0,72.167.29.18,3308#
72.167.29.18 is our server’s IP address,3308 is the port.
If client have the server by himself,pls make sure the ip and port is
correct.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’015’OK
*000000,015,0,72.167.29.18,3308#
Step3: Set Time Interval GPRS
Format: *$$$$$$,018,X,Y#
X: the time interval(unit:sec),Y: the times of the data have to send by
GPRS.
For example:*000000,018,60,999#
The device will send GPRS every 1 mins and no times limit.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’018’OK
*000000,018,60,999#
Step4: Open the GPRS fuction
Format: *$$$$$$,016,X#
X: close/open the GPRS function,
For example: *000000,016,1#
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’016’OK
*000000,016,1#
2.2.2 Set the sleep mode
Step1: open the sleep mode and the tremble sensor
Format: *$$$$$$,021,XY#
X: close/open the sleep mode
Y:
close/open the tremble sensor
For example: *000000,021,11#
When you want to use the sleep mode of function,make sure
open the sleep mode and tremble sensor
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’021’OK
*000000,021,11#
Step2: set the time of no tremble into the sleep.
Format: *$$$$$$,044,X#
X: After the tremble sensor don't tremble for X second, tracker
will into sleep mode(unit：sec)
For example：*000000,044,60#
If the device don't tremble for 60 sec,the device will into the
sleep mode.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’044’OK
*000000,044,60#
Step 3:
set the time of tremble to wake up the device
Format: *$$$$$$,043,X#
X: After the tremble sensor continuous tremble for
device will wake up.
For example: *000000,043,30#
X second,
If the tremble sensor continuous tremble for 30 sec,device will
wake up.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’043’OK
*000000,043,30#
2.2.3 Set the parking alarm function
Step1: open the tremble sensor of switch
Format : *$$$$$$,021,XY#
For example: *000000,021,01#
Close the sleep mode and open the tremble sensor of the above of
the set.
Of course you could open the sleep mode too.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’021’OK
*000000,021,01#
Step 2: open the parking alarm of function
Format: *$$$$$$,110,X#
X=1,open the function ,X=0 close the function
For example: *000000,110,1#
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’110’OK
*000000,110,1#
Step 3:
open the GPRS function
For example: *000000,016,1#
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’016’OK
*000000,016,1#
2.2.4 Set the interval SMS
Step1:
Set the SOS number
Format: *$$$$$$,003,0,F,CallNumber,SMS Number#
When the device send to SMS to mobile phone by interval,should
to set a SOS number which the number of the mobile phone to receive
the data.
For example:
*000000,003,0,1,008613800755500, 008613800755500##
When set the SOS number,pls append the 00 and international
number as the example.86 is the international number for china.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’003’OK
*000000,003,0,1,008613800755500, 008613800755500#
Step2: Set the interval time for SMS.
Format:
*$$$$$$,002,X,Y#
X: Time interval (unit:mins)
Y: the times of the data have to send by SMS
For example :*000000,002,1,999#
The device will send SMS every 1 mins and no times limit.
Afeter you send the command of SMS to device,it will reply to your
mobile phone: Receive:’002’OK
*000000,002,1,999#
2.2.5
●
Other useful commands
Get current location:
**$$$$$$,000#
●
Get the IMEI from the device:
*$$$$$$,801#
●
Reboot the device by SMS:
*$$$$$$,991#
●
Initialization the device
*$$$$$$,990,099#
3 The format of the GPRS
The data of the device send to the server:
Format：$$(2 Bytes) + Len(2 Bytes) + IMEI(15 Bytes) + | + AlarmType(2 Bytes) + GPRMC
+ | + PDOP + | + HDOP + | + VDOP + | + Status(12 Bytes) + | + RTC(14 Bytes) + | +
Voltage(8 Bytes) + | + ADC(8 Bytes) + | + LACCI(8 Bytes) + | + Temperature(4 Bytes) | +
Serial(4 Bytes) + | + Checksum (4 Byte) + \r\n(2 Bytes)
The format of ASCII:
$$A9353358019474100|AA$GPRMC,043002.000,A,2232.4289,N,11403.7343,E,0.00,,24
0809,,*1D|02.3|02.0|01.0|110011110000|20090824043003|14201300|00000000|2533762
1|0000|2280|96F7
The format in hex:
24 24 41 39 33 35 33 33 35 38 30 31 39 34 37 34 31 30 30 7C 41 41 24 47 50 52 4D 43
2C 30 34 33 30 30 32 2E 30 30 30 2C 41 2C 32 32 33 32 2E 34 32 38 39 2C 4E 2C 31 31
34 30 33 2E 37 33 34 33 2C 45 2C 30 2E 30 30 2C 2C 32 34 30 38 30 39 2C 2C 2A 31 44
7C 30 32 2E 33 7C 30 32 2E 30 7C 30 31 2E 30 7C 31 31 30 30 31 31 31 31 30 30 30 30
7C 32 30 30 39 30 38 32 34 30 34 33 30 30 33 7C 31 34 32 30 31 33 30 30 7C 30 30 30
30 30 30 30 30 7C 32 35 33 33 37 36 32 31 7C 30 30 30 30 7C 32 32 38 30 7C 39 36 46
37 0D 0A
Code
Explanation
$$
2Bytes, indicates header of command from tracker unit to call centre, in
ASCII code (hex is 0x24).
Len
2Bytes, indicates length of all command, including header and end (the
array is first high to low).
IMEI
15Bytes, at most 20 bytes.
Alarm type
2Bytes, the GPRS data trigger type.
DATA
GPRMC string
PDOP
HDOP
VDOP
Status (12bytes)
RTC (14bytes)
Voltage(8bytes)
ADC
8bytes,the ADC value.
LACCI
Location information elements
Temperature
Temperature information
Serial ID
4bytes, sign every GPRS data, the range is [0001-9999], then circle it
again from 0001 to 9999.
Checksum
2Bytes, means CRC check of all the data ahead, CRC-16 modbus
(Polynomial = 0xA001，initialize data is 0xffff) checksum, not including its
own byte and end characters. For example: (hex format）
24 24 41 39 33 35 33 33 35 38 30 31 39 34 37 34 31 30 30 7C 41 41 24
47 50 52 4D 43 2C 30 34 33 30 30 32 2E 30 30 30 2C 41 2C 32 32 33 32
2E 34 32 38 39 2C 4E 2C 31 31 34 30 33 2E 37 33 34 33 2C 45 2C 30
2E 30 30 2C 2C 32 34 30 38 30 39 2C 2C 2A 31 44 7C 30 32 2E 33 7C
30 32 2E 30 7C 30 31 2E 30 7C 31 31 30 30 31 31 31 31 30 30 30 30 7C
32 30 30 39 30 38 32 34 30 34 33 30 30 33 7C 31 34 32 30 31 33 30 30
7C 30 30 30 30 30 30 30 30 7C 32 35 33 33 37 36 32 31 7C 30 30 30 30
7C 32 32 38 30 7C 39 36 46 37 0D 0A
0x96F7(39 36 46 37) = CRC-16 modbus (24 24 41 39 33 35 33 33 35 38
30 31 39 34 37 34 31 30 30 7C 41 41 24 47 50 52 4D 43 2C 30 34 33 30
30 32 2E 30 30 30 2C 41 2C 32 32 33 32 2E 34 32 38 39 2C 4E 2C 31 31
34 30 33 2E 37 33 34 33 2C 45 2C 30 2E 30 30 2C 2C 32 34 30 38 30 39
2C 2C 2A 31 44 7C 30 32 2E 33 7C 30 32 2E 30 7C 30 31 2E 30 7C 31
31 30 30 31 31 31 31 30 30 30 30 7C 32 30 30 39 30 38 32 34 30 34 33
30 30 33 7C 31 34 32 30 31 33 30 30 7C 30 30 30 30 30 30 30 30 7C 32
35 33 33 37 36 32 31 7C 30 30 30 30 7C 32 32 38 30 7C).
\r\n
2Bytes, end char (hex format is 0x0d,0x0a).
•
Alarm type
o 0x01 SOS button is pressed
o 0x49 Button A is pressed
o 0x09 Auto Shutdown Alarm
o 0x10 Low battery Alarm
o 0x11 Over Speed Alarm
o 0x13 Recover From Over Speed
o 0x30 Parking Alarm
0x42 Out Geo-fence Alarm
o 0x43 Into Geo-fence Alarm
o 0x50 IO-1 Close
o 0x51 IO-1 Open
o 0x52 IO-2 Close
o 0x53 IO-2 Open
o 0x54 IO-3 Close
o 0x55 IO-3 Open
o 0x56 IO-4 Close
o 0x57 IO-4 Open
o 0x60 Begin Charge
o 0x61 End Charge
o 0x88 Heartbeat
o 0x91 Into Sleep Mode
o 0x92 Wakeup From Sleep Mode
o 0xAA Interval GPRS data
Status(12 Bytes) —— Status：
o Byte 01 —— SOS button
o Byte 02 —— Button A button（reserve）
o Byte 03 —— Button B button（reserve）
o Byte 04 —— Button C button（reserve）
o Byte 05 —— Input 1
o Byte 06 —— Input 2
o Byte 07 —— Input 3（reserve）
o Byte 08 —— Input 4（reserve）
o Byte 09 —— Out 1
o Byte 10 —— Out 2
o Byte 11 —— Out 3（reserve）
o Byte 12 —— Out 4（reserve）
Voltage(8 Bytes) ——Value of the voltage：
o Format：ABBBIIII
o A —— Charge Status (0 = Off Charge , 1 = On Charge)
o BBB —— Battery Voltage (For example, 367 mean 3.67V)
o IIII —— Input Charge Voltage (For example, 1251 mean 12.51V)
ADC(8 Bytes) —— AD collection：
o Format：CCCCDDDD
o CCCC —— ADC0 collect (For example, 1251 mean 12.51V)
o DDDD —— ADC1 collect (For example, 1251 mean 12.51V)（reserve）
LACCI(8 Bytes) —— Location information elements：
o Format：LLLLCCCC
o LLLL —— Location area code
o CCCC —— Cell ID
Temperature(4 Bytes) —— Temperature（reserve for the device has no
temperature sensor）：
o
•
•
•
•
•
Format：STTT
o Precision is 0.1℃
o The first byte “S” mean sign， such as“0/1/-”
o Eg：0345 mean +34.5℃，1234 mean +123.4℃，-123 mean -12.3℃
Serial(4 Bytes) —— Serial number：
o Format：SSSS
o Every time reboot the device or reset,the serial number will initialize to
0001.
o Every GPRS message send out will add one
o After the serial number to 9999, restart from 0001 again
o
•
The link of the explain about the CRC-16(modbus):
http://www.lammertbies.nl/comm/info/crc-calculation.html
4. SMS instruction list.
If you want to know more about the AVL, and design your special AVL,
you can refer to the SMS instruction list.
$$$$$$ is user`s password , and initial password is 000000
SMS Instruction
Format
1
Request one position
*$$$$$$,000#
2
Modify user password
*$$$$$$,001,@@@@@@#
3
Set the time intervals of position
notice SMS
*$$$$$$,002,X,Y#
The Position SMS will send to
the preset SOS number.
Note
$$$$$$ is old password
@@@@@@ is new
Password
X ( Max 3 Digital)
=0, Stop send position SMS
=[1,999] Time interval (Unit:
mins)
Y (Max 3 Digital)
=[1,999）times send SMS
Y=0, Disable this funiction
Y=999, continue send SMS
4
Set a preset phone & SMS
number for SOS button
*$$$$$$,003,0,F,CallNumber,
SMS Number#
F = 0, Disable this function
=1, Only send an alarm
SMS to the preset SMS
Number
Notice :Tel Number and SMS
Number ( must <25 digits)
5
Set
low power alarm
*$$$$$$,004,XXX,YYY#
XXX is the low power alarm
voltage,eg: 3.8v,XXX=380
YYY is the auto shut down
voltage,eg: 3.5v,YYY=350
For example：
*$$$$$$,004,380,350#
*$$$$$$,005,S,X,Y,Z#
S=1 Enable speed alarm,
S=0 Disable speed alarm.
X=[10<XXX<250]
(The
speed preset value)
unit is 0.1 sea mile/h
Y is the times over speed
[1,999]
Z=[10,360],( The timeinterval
to send speed alarm)
unit is second.
When the AVL voltage is lower
than the preset value,
AVL will send one lower power
alarm GPRS data to the Preset
Server.
6
Set over speed alarm
When the AVL speed higher
than the preset value, AVL will
send one over speed alarm
GPRS data to the Preset
Server.
7
Set Geo-fence alarm
When the AVL move out preset
scope, AVL will send one
Geo-fence GPRS data to the
Preset Server.
*$$$$$$,006,+lat1,+long1,+lat2
,+long2,X,Y#
X=[10,360] is for time interval
send alarm message.
Y=0, Disable GEO-fence
alarm.
Y=1, Into GEO-fence alarm.
Y=2, Out of GEO-fence
alarm.
Long1>long2&lat1>lat2
8
Set APN,Username,Password
*$$$$$$,011,APN,Username,P
assword#
APN : APN string (Max 28
chars)
User name: Your username
(Max 28 chars)
Password: Your password
(Max 28 chars)
* If haven't username or
password, then left it blank.
For example:
*000000,011,CMNET,,## (It
haven't
username
and
password)
9
Set IP Address & port number
*$$$$$$,015,0,IP,PORT#
IP : xxx.xxx.xxx.xxx
PORT : [1,65535]
10
Set the time intervals of GPRS
Data
*$$$$$$,018,X,Y#
X (3 Digital)
=0 stop send time interval
GPRS
=[10,999] Time interval
(Unit: sec)
Y (3 Digital)
=0, stop send time interval
GPRS
= [1,999] After send YYY
times stop.
=999, continue send GPRS
un-stop
11
Enable/Disable GPRS function
*$$$$$$,016,X#
X=0 Disable GPRS unction
X=1 Enable GPRS Function
This is the last step of GPRS
setting.
12
Tremble sensor switch
*$$$$$$,021,XY#
X = 0 Disable Sleep mode
X = 1 Enable Sleep mode
Y = 0 Disable the tremble
sensor
Y = 1 Enable the tremble
sensor
13
Enable/Disable I/O port
*$$$$$$,025,X,Y#
X=1 means the output port 1
Y=0, Out port is low Y=1, Out
port is high
For Example:
*000000,025,1,1#
14
Heart Beat Switch
*$$$$$$,040,X#
X=0 Disable the heart beat
function
X=1 Enable the heart beat
function
15
Heart Beat Intervals
*$$$$$$,041,X#
X is the heart beat interval,
unit is minute [1<X<9999]
X=0, Disable this funiction.
16
Heart Beat Init
*$$$$$$,042,0#
When receive this command,
the heart beat will re-count
time
17
Into sleep mode when without
tremble for preset time
*$$$$$$,044,X#
After the tremble sensor
don't tremble for X second,
tracker will into sleep mode
30< X <65536 (Unit :
second)
For
Example,
configure
AVL02 into sleep mode after
no tremble for 30 second:
*000000,044,30#
18
Wake up from Tremble
*$$$$$$,043,X#
After
the
tremble
sensor
continuous tremble for X
second, tracker will wake up
X=[1,255) (Unit : second)
AVL02 Wake up from sleep
mode after no tremble for 10
second:
*000000,043,10#
19
Parking alarm
*$$$$$$,110,X#
X=1 Enable Tremble alarm
function, then if the AVL02 is
Trembling for 30s continually,
it will alarm(0x30),
X=0 Disable Tremble alarm
function
20
Reading the IMEI number
*$$$$$$,801#
This command to ask AVL
reply the IMEI number
21
Initialization Tracker
*$$$$$$,990,099#
It will set all parameter to
factory default value
(Excluding the Password).
22
Reboot by SMS command
*$$$$$$,991#
It will reboot the AVL02 by
this SMS command.
23
Extend setting
*$$$$$$,008,ABCDEFG#
A=0, Disable position report
function which get position
SMS by Calling
A=1, Enable position report
function which get position
SMS by Calling
B=0, Send the SMS in Text
format.
B=1, Send the SMS in NMEA
format.
C=0, AVL do NOT hung up
when one call incoming
C=1, AVL hung up after 4~5
rings when call incoming
D=0
E=0
F=0
G=0
24
Set the GPRS mode
*$$$$$$,019,X#
X=0, Use the UDP mode
X=1, Use the TCP mode
25
Set the Module
*$$$$$$,022,X,Y#
X=0, Close the GPS module
when into sleep
X=1, Open the GPS module
when into sleep.
Y=0, Close the GSM module
when into sleep
Y=1, Open the GSM module
when into sleep
5. Update the firmware of the AVL
1）Install RS232 cable driver
A. At the first, Install the Driver for “USB Converter”
B. Connect the AVL unit to PC through RS232 cable, View the com port that the
cable used
2）Turn on AVL device
3）Build a New Hyper terminal connect, fill the name, example as IAP_DL
4）Choose the Com Port that the RS232 Cable used
Setup all the option like show in the picture follow
5）Into Configure Mode
6）Turn Off AVL device
7）Press the Unit’s SOS button and Turn on Power(Please hold it for several
seconds)，Unit’s GSM/GPS/Sensors LED will still light at same time，Hyper terminal
will display the interface like the picture follow. Then choose Send file（Send-> Send
File）
Choose the firmware that you want to Update；
Protocol Choose: Xmodem
Press Send button, Will display a New Windows that show the update process.
(6) When finish Update, Tracker will reboot automatically, and the
GSM/GPS/Sensors light will blink quickly. After about 3-5 mins, this interface will
shut by itself. When the update is pressing, all indicator will off for 10 seconds,
doesn’t turn off power of AVL02, otherwise will cause MCU broken.
(7) When the AVL02 LED is blinking back to normal mode. Turn Off and Turn On
Tracker again. The Firmware updates finish.
6 Worldwide APN (Access Point Name) List