Download Cajun M770 version 2.3 User`s Guide

Chapter 5
Managing Physical Ports
To display information for all physical ports, enter the pport show command.
Command: M15-155s8:/>pport show
Physical Port Information
Output:
Port Admin
Id
State
8.0
Up
8.1
Up
8.2
Up
8.3
Up
8.4
Up
.
.
.
8.13
Up
8.14
Up
8.15
Up
8.16
Up
Port
Id
8.0
8.1
8.2
8.3
8.4
.
.
8.11
8.12
8.13
8.14
8.15
8.16
Oper
State
Up
Down
Down
Down
Down
Speed
Kbps
--155520
155520
155520
155520
Framing
Mode
--Sonet
Sonet
Sonet
Sonet
VPI
Range
[0..0]
[0..7]
[0..7]
[0..7]
[0..7]
Down
Down
Down
Down
155520
155520
155520
155520
Sonet
Sonet
Sonet
Sonet
[0..7]
[0..7]
[0..7]
[0..7]
VPC VPI
Range
[0..4095]
---------
---------
VCI
[0..1023]
[0..1023]
[0..1023]
[0..1023]
[0..1023]
[0..1023]
[0..1023]
[0..1023]
[0..65535]
Cell
Mode
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
Payload
Scrambling
On
On
On
On
On
Media
Type
--MMF
MMF
MMF
MMF
Media Last
Mode
Change
UP
--LRDI
0:00:00:15.0
UP
0:00:00:54.4
LRDI
0:00:00:22.8
UP
0:00:00:63.4
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
On
On
On
On
On
Off
MMF
MMF
MMF
MMF
MMF
---
UP
UP
UP
UP
UP
---
0:00:00:06.7
0:00:00:12.1
0:00:00:30.1
0:00:00:19.9
0:00:00:27.4
---
Note: In the Table above, Port 0 is the CPU port and Port 16 is the Backplane port.
Note: When you enter M4-DS3s8:/> pport show for the DS3 module you will see
all of the parameters displayed in the Table above, with information at the bottom
of the table for several additional Physical Port parameters displayed only for DS3
modules. See the Table below.
40
Avaya M770 ATM Switch User’s Guide