Download Manual T50 REV1.indd - Genesis Hobby Distributor

3.1 LANDING GEAR
M3x15mm Socket Head Bolt (x4)
M3x6mm Set Screw (x4)
M3x15mm Socket
Head Bolt (x4)
M3mm Nylon Lock Nut (x4)
M3mm Flat Washer (x8)
* PRO TIP: Use nylon zip-ties
instead of socket head bolts
and nylon lock nuts to secure
landing gear struts to the main
frame - this helps prevent
greater damage in case you
slam dunk your helicopter
when practicing 3D.
Antenna Guide Tube
M3mm Nylon
Lock Nut (x4)
Skid Cap (x4)
M3x6mm Set
Screw (x4)
”
/16
1-3
Landing Gear Strut (x2)
Fore
* NOTE: Use a small dab
of silicone RTV as glue to
help retain skid caps.
Aft
M3mm Flat Washer (x8)
Landing Skid (x2)
* NOTE: Minimum length = 1-3/16”
11