Download SoundStructure Design Guide - Support
Transcript
If the reference is set properly and includes all the remote audio sources and there is still an echo heard by the remote participants, the next step is to understand how the amplifier output fader is set. In some applications, the line level outputs of the SoundStructure could be connected to the inputs of a microphone-only device that requires the outputs of the SoundStructure to be attenuated significantly to be compatible with the microphone level inputs. If the output fader on the amplifier channel is used to attenuate the amplifier signal as shown in the figure below and the AEC reference is also set to the amplifier output, then the AEC reference would also be attenuated by the fader amount. Polycom, Inc. 507
Related documents
Polycom C12 Speaker System User Manual
NOVUS® Valves and Kits
Polycom C16 User's Manual
Multimètre de table 50.000 points 50,000 count
Polycom HDX Ceiling Microphone Array
Sun Secure Global Desktop 4.5 Release Notes
RSS 2000 V3.0 Getting Started guide - Release Notes
RSS 2000 Getting Started Guid and Release Notes v 3.0.0
Polycom RSS 2000 User's Manual
Polycom Premier, 1Y, VMC
Polycom pag. 1 - Adeo Group SpA
Corvus systems Personal Workstation Instruction manual