Download Emerson CF1 Weathered Bronze Ceiling Fan

NOTE: Before discarding packaging material, be
certain all parts have been removed.
Unpacking Instructions
For your convenience, check-off boxes are
provided next to each step. As each step is
completed, place a check mark in the box. This
will insure that all steps have been completed and
will be helpful in finding your place should you be
interrupted.
!
FAN MOTOR AND
HOUSING ASSEMBLY
MOTOR
COVER
WARNING
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
!
HANGER BALL/
DOWNROD
ASSEMBLY
LOOSE
PARTS
BAG
WARNING
HANGER
BRACKET
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Company. Substitution of parts or
accessories not designated for use with this product
by Emerson Company could result in personal injury
or property damage.
BLADE FLANGES
(2-BLADE VERSION)
CEILING
COVER
TRIM
BLADE FLANGES
(4-BLADE VERSION)
CEILING
COVER
1. Open styrofoam unit containing fan. Remove top
half of styrofoam unit. Remove parts and check to
see that you have received the following:
UPPER
COVER
TRIM
DOWNROD
TRIM
BULB
a. Fan motor and housing assembly
b. One motor cover
c. One ceiling cover
d. One ceiling cover trim
e. Four blade flanges (14°)
f. Two blade flanges (20°)
g. One hanger ball/downrod assembly
h. One 18” downrod
i. One downrod trim
j. One decorative bulb
k. One hanger bracket
l. One upper cover trim
m.One lower trim assembly
n. One loose parts bag containing:
1. One setscrew
2. One setscrew wrench
3. Nine 10-32 x 5/8" oval head screws
4. Two 1” threaded studs
5. Two 1-1/4” threaded studs
6. Four knurled knobs
7. Four lockwashers
8. Five wire connectors
9. Seven 8-32 x 1/2" screws
10. One pull chain pendant and coupling
11. One hairpin clip
12. One clevis pin
13. Twenty-one 10-32 x 3/8" pan head screws
14. Twenty-one flat washers
LOWER
TRIM
ASSEMBLY
18"
DOWNROD
DOWNROD TRIM
General Information
Your Cornerstone ceiling fan comes with two sets
of blade flanges. One set (consisting of two
flanges) allows you to use your fan with two
blades, as the original 1895 Ceiling Fan was
configured. The other set (consisting of four
flanges) allows you to use your fan with four
blades. Both sets of flanges, and the fan blades
you selected, are patterned after the original
1895 Ceiling Fan. If your ceiling is nine feet or
higher, you may use the 18-inch downrod, along
with the downrod trim and decorative bulb, to
further enhance the 1895 ceiling fan look.
NOTE: Place the parts from the loose parts bags
in small containers to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.
3