Download Pentax Optio 43WR Digital Camera User Manual

00_Optio43WR-E.book Page 91 Wednesday, February 25, 2004 1:23 PM
Printing Using Printing Service Settings
1
On the [Select printing mode] screen, press the fourway controller (23) to select [DPOF AUTOPRINT].
2
Press the OK button.
The [Print w/DPOF settings] screen is displayed.
Use the four-way controller (45) to check the images and printing
service settings.
3
4
Use the four-way controller (23) to
select an image to print.
100-0001
Print w/DPOF settings
Press the OK button.
Copies
01
You can print using the printing service
05
Total
settings specified for the selected image.
OK Print
MENU Exit
The message “Continue printing?” is
displayed after the image has been printed. To continue printing, press
the OK button to return to the screen displayed before printing.
5
When you have finished printing, press the MENU
button.
The “Safely remove USB cable” message is displayed.
Disconnect the Camera from the Printer
Turn the camera off.
Disconnect the USB cable from the camera.
Disconnect the USB cable from the printer.
7
Printing
1
2
3
Pressing the MENU button when the “Continue printing?” message is
displayed causes the “Safely remove USB cable” to be displayed.
When the USB cable is disconnected from the camera while the camera
is turned on, the camera automatically switches to the Capture mode.
91