Download Patton electronic 4830 Network Card User Manual

SmartNode 4830 Getting Started Guide
D • Port pin-outs
Introduction
This section provides pin-out information for the ports of the SmartNode.
Console port
Configuration settings: 9600 bps, 8 bits, no parity, 1 stop bit, no flow control
8–RTS (N/C)
7–CTS (N/C)
6–TD
5–RD
4–SG
3–DTR
2–CD (N/C)
1–DSR
1 2 3 4 5 6 7 8
Pins 1 & 3 are
connected together
Figure 33. EIA-561 (RJ-45 8-pin) port
Note
N/C means no internal electrical connection.
Ethernet 10Base-T and 100Base-T port
Table 15. RJ-45 socket
Note
Introduction
Pin
Signal
1
2
3
6
TX+
TXRX+
RX-
Pins not listed are not used.
77