Download Olympus 300 DIGITAL Digital Camera User Manual

Names of parts
zMemory gauge
The memory gauge lights up when you take a picture or record a movie. While
the gauge is lit, the camera is storing the picture or the movie on the card. The
memory gauge indication changes as shown below depending on the
shooting status.
When the whole memory gauge is lit, wait a few moments until the lit area goes
off before taking the next shot.
1
When taking still pictures
Shoot
Shoot
Shoot
One picture taken
(Lit)
More than two taken
(Lit)
No more pictures can be
taken
(Fully lit)
Wait until the gauge
returns to the status on the
left to take the next shot.
When recording movies
If you continue shooting
Shoot
Wait
Before
shooting
(Gauge is off)
During shooting (Lit)
• Shooting is not possible until the lit area goes off completely.
• Movie recording ends automatically when the whole memory gauge
is lit.
zBattery check
If the remaining battery power is low, the battery check indication on the
monitor changes as follows when the camera is turned on or while the camera
is in use.
No indication
Lights (Green)
Pictures can be
taken.*
Lights (Red)
Green and orange lamps on
right of viewfinder blink
Remaining power level: low Remaining power level:
Recharge as soon as
exhausted
possible especially for
Replace with a charged
extended use.
battery.
13
Getting started
Wait
Before shooting
(Gauge is off)